FDS6679_05 Datasheet, PDF (2/4 Pages) Fairchild Semiconductor – 30 Volt P-Channel PowerTrench® MOSFET

Electrical Characteristics
Symbol
Parameter
T_A = 25°C unless otherwise noted
Test Conditions
Min Typ Max Units
Off Characteristics
BV_DSS
∆BVDSS
∆T_J
I_DSS
Drain–Source Breakdown Voltage V_GS = 0 V, I_D = –250 µA
–30
Breakdown Voltage Temperature
Coefficient
I_D = –250 µA, Referenced to 25°C
Zero Gate Voltage Drain Current V_DS = –24 V, V_GS = 0 V
I_GSS
Gate–Body Leakage
V_GS = ±25 V, V_DS = 0 V
V
–23
mV/°C
–1
µA
±100 nA
On Characteristics (Note 2)
V_GS(th)
Gate Threshold Voltage
∆VGS(th)
∆T_J
R_DS(on)
Gate Threshold Voltage
Temperature Coefficient
Static Drain–Source
On–Resistance
I_D(on)
On–State Drain Current
g_FS
Forward Transconductance
V_DS = V_GS, I_D = –250 µA
–1 –1.6 –3
V
I_D = –250 µA, Referenced to 25°C
5
mV/°C
V_GS = –10 V, I_D = –13 A
V_GS = –4.5 V, I_D = –11 A
V_GS=–10 V, I_D =–13 A, T_J=125°C
7.3
9
mΩ
10 13
9.5 13
V_GS = –10 V, V_DS = –5 V
–50
A
V_DS = –5 V,
I_D = –13 A
44
S
Dynamic Characteristics
C_iss
Input Capacitance
C_oss
Output Capacitance
C_rss
Reverse Transfer Capacitance
V_DS = –15 V,
f = 1.0 MHz
V _GS = 0 V,
3939
pF
972
pF
498
pF
Switching Characteristics
t_d(on)
Turn–On Delay Time
t_r
Turn–On Rise Time
t_d(off)
Turn–Off Delay Time
t_f
Turn–Off Fall Time
Q_g
Total Gate Charge
Q_gs
Gate–Source Charge
Q_gd
Gate–Drain Charge
(Note 2)
V_DD = –15 V,
V_GS = –10 V,
I_D = –1 A,
R_GEN = 6 Ω
V_DS = –15 V,
V_GS = –10 V
I_D = –13 A,
19 34
ns
10 20
ns
110 176
ns
65 104
ns
71 100 nC
12
nC
15
nC
Drain–Source Diode Characteristics and Maximum Ratings
I_S
Maximum Continuous Drain–Source Diode Forward Current
V_SD
Drain–Source Diode Forward
Voltage
V_GS = 0 V, I_S = –2.1 A (Note 2)
–2.1
A
–0.7 –1.2
V
Notes:
1. R_θJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of
the drain pins. R_θJC is guaranteed by design while R_θCA is determined by the user's board design.
a) 50°C/W (10 sec)
62.5°C/W steady state
when mounted on a
1in² pad of 2 oz
copper
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%
b) 105°C/W when
mounted on a .04 in²
pad of 2 oz copper
c) 125°C/W when mounted on a
minimum pad.
FDS6679 Rev C1 (W)