FDS5670 Datasheet, PDF (2/8 Pages) Fairchild Semiconductor – 60V N-Channel PowerTrench™ MOSFET

Electrical Characteristics
Symbol
Parameter
T_A = 25°C unless otherwise noted
Test Conditions
Min Typ Max Units
Off Characteristics
BVDSS
Drain-Source Breakdown Voltage
VGS = 0 V, ID = 250 µA
60
∆BVDSS
∆TJ
IDSS
Breakdown Voltage Temperature
Coefficient
Zero Gate Voltage Drain Current
ID = 250 µA, Referenced to 25°C
VDS = 48 V, VGS = 0 V
IGSSF
Gate-Body Leakage Current, Forward VGS = 20 V, VDS = 0 V
IGSSR
Gate-Body Leakage Current, Reverse VGS = -20 V, VDS = 0 V
V
58
mV/°C
1
µA
100 nA
-100 nA
On Characteristics (Note 2)
VGS(th)
Gate Threshold Voltage
∆VGS(th)
∆TJ
RDS(on)
Gate Threshold Voltage
Temperature Coefficient
Static Drain-Source
On-Resistance
ID(on)
gFS
On-State Drain Current
Forward Transconductance
VDS = VGS, ID = 250 µA
2
2.4
4
V
ID = 250 µA, Referenced to 25°C
6.8
mV/°C
VGS = 10 V, ID = 10 A
0.012 0.014 Ω
VGS = 10 V, ID = 10 A, TJ=125°C
0.019 0.027
VGS = 6 V, ID = 9 A
0.014 0.017
VGS = 10 V, VDS = 5 V
25
A
VDS = 5 V, ID = 10 A
39
S
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
VDS = 15 V, VGS = 0 V
f = 1.0 MHz
2900
pF
685
pF
180
pF
Switching Characteristics
td(on)
Turn-On Delay Time
tr
Turn-On Rise Time
td(off)
Turn-Off Delay Time
tf
Turn-Off Fall Time
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
(Note 2)
VDD = 30 V, ID = 1 A
VGS = 10 V, RGEN = 6 Ω
VDS = 20 V, ID = 10 A
VGS = 10 V,
16 29
ns
10 20
ns
50 80
ns
23 42
ns
49
70
nC
9
nC
10.4
nC
Drain-Source Diode Characteristics and Maximum Ratings
IS
Maximum Continuous Drain-Source Diode Forward Current
VSD
Drain-Source Diode Forward Voltage VGS = 0 V, IS = 2.1 A (Note 2)
2.1
A
0.72 1.2
V
Notes:
1. R_θJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the
drain pins. R_θJC is guaranteed by design while R_θJA is determined by the user's board design.
a) 50° C/W when
mounted on a 0.5 in²
pad of 2 oz. copper.
b) 105° C/W when
mounted on a 0.02 in²
pad of 2 oz. copper.
c) 125° C/W when mounted
on a minimum pad.
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
FDS5670 Rev. B