FDMC2674_07 Datasheet, PDF (2/7 Pages) Fairchild Semiconductor – N-Channel UltraFET Trench MOSFET 220V, 7.0A, 366mΩ

Electrical Characteristics T_J = 25°C unless otherwise noted
Symbol
Parameter
Test Conditions
Min
Off Characteristics
BV_DSS
ΔBV_DSS
ΔT_J
I_DSS
I_GSS
Drain to Source Breakdown Voltage
Breakdown Voltage Temperature
Coefficient
Zero Gate Voltage Drain Current
Gate to Source Leakage Current
I_D = 250μA, V_GS = 0V
220
I_D = 250μA, referenced to 25°C
V_DS = 176V, V_GS = 0V
V_GS = ±20V, V_DS = 0V
On Characteristics
V_GS(th)
ΔV_GS(th)
ΔT_J
Gate to Source Threshold Voltage
Gate to Source Threshold Voltage
Temperature Coefficient
r_DS(on)
Static Drain to Source On Resistance
V_GS = V_DS, I_D = 250μA
2
I_D = 250μA, referenced to 25°C
V_GS = 10V, I_D = 1.0A
V_GS = 10V, I_D = 1.0A , T_J = 150°C
Dynamic Characteristics
C_iss
C_oss
C_rss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
V_DS = 100V, V_GS = 0V,
f = 1MHz
Switching Characteristics
t_d(on)
t_r
t_d(off)
t_f
Q_g(TOT)
Q_gs
Q_gd
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Gate Charge at 10V
Gate to Source Gate Charge
Gate to Drain “Miller” Charge
V_DD = 100V, I_D = 1.0A
V_GS = 10V, R_GEN = 2.4Ω
V_GS = 0V to 10V _{VDD = 15V}
I_D = 1.0A
Drain-Source Diode Characteristics
V_SD
Source to Drain Diode Forward Voltage
t_rr
Reverse Recovery Time
Q_rr
Reverse Recovery Charge
V_GS = 0V, I_S = 2.2A (Note 2)
I_F = 1.0A, di/dt = 100A/μs
Typ
248
3.4
-10.2
305
678
880
70
11
9
13
15
21
12.7
3.8
2.9
0.8
Max Units
1
±100
V
mV/°C
μA
nA
4
V
mV/°C
366
mΩ
814
1180
pF
95
pF
20
pF
18
ns
23
ns
27
ns
34
ns
18
nC
nC
nC
1.5
V
60
ns
109
nC
Notes:
1: R_θJA is determined with the device mounted on a 1 in² oz copper pad on a 1.5 x 1.5 in. board of FR-4 material. R_θJC is guaranteed by design while R_θJA is determined by the
user's board design.
(a)R_θJA = 60°C/W when mounted on a 1 in² pad of 2 oz copper, 1.5’x1.5’x0.062’ thick PCB.
(b)R_θJA = 135°C/W when mounted on a minimum pad of 2 oz copper.
a. 60°C/W when mounted on
a 1 in² pad of 2 oz copper
b. 135°C/W when mounted on a
minimum pad of 2 oz copper
2: Pulse Test: Pulse Width < 300μs, Duty cycle < 2.0%.
FDMC2674 Rev.F
2
www.fairchildsemi.com