100EL16 Datasheet, PDF (2/5 Pages) Fairchild Semiconductor – 5V ECL Differential Receiver

Absolute Maximum Ratings(Note 1)
PECL Supply Voltage (V_CC)
V_EE = 0V
NECL Supply Voltage (V_EE)
V_CC = 0V
PECL DC Input Voltage (V_I)
V_EE = 0V
NECL DC Input Voltage (V_I)
V_CC = 0V
DC Output Current (I_OUT)
Continuous
Surge
V_BB Sink/Source Current (I_BB)
Storage Temperature (T_STG)
0.0V to +8.0V
0.0V to −8.0V
0.0V to +6.0V
0.0V to −6.0V
50 mA
100 mA
±0.5 mA
−65°C to +150°C
Recommended Operating
Conditions
PECL Power Supply
(V_EE = 0V)
NECL Power Supply
V_CC = 4.2V to 5.5V
(V_CC = 0V)
V_EE = −4.2V to −5.5V
Free Air Operating Temperature (T_A)
−40°C to +85°C
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
100EL PECL DC Electrical Characteristics V_CC = 5.0V; V_EE = 0.0V (Note 2)
Symbol
Parameter
−40°C
25°C
85°C
Units
Min Typ Max Min Typ Max Min Typ Max
I_EE
V_OH
V_OL
V_IH
V_IL
V_BB
V_IHCMR
Power Supply Current
Output HIGH Voltage (Note 3)
Output LOW Voltage (Note 3)
Input HIGH Voltage (Single Ended)
Input LOW Voltage (Single Ended)
Output Voltage Reference
Input HIGH Voltage Common Mode
Range (Differential) (Note 4)
18
22
18
22
21
26
mA
3915 3995 4120 3975 4045 4120 3975 4050 4120 mV
3170 3305 3445 3190 3295 3380 3190 3295 3380 mV
3835
4120 3835
4120 3835
4120 mV
3190
3525 3190
3525 3190
3525 mV
3.62
3.74 3.62
3.74 3.62
3.74
V
2.5
4.6
2.5
4.6
2.5
4.6
V
I_IH
Input HIGH Current (Note 5)
150
150
150
µA
I_IL
Input LOW Current (Note 5)
0.5
0.5
0.5
µA
Note 2: Input and output parameters vary 1 to 1 with V_CC. V_EE can vary +0.8V/−0.5V.
Note 3: Outputs are terminated through a 50Ω Resistor to V_CC − 2.0V.
Note 4: V_IHCMR minimum varies 1 to 1 with V_EE. V_IHCMR maximum varies 1-to-1 with V_CC. The V_IHCMR range is referenced to the most positive side of the
differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between V_PPMIN and
1V.
Note 5: Absolute value of the input HIGH and LOW current should not exceed the absolute value of the stated Min or Max specification.
Note: Devices are designed to meet the DC specifications after thermal equilibrium has been established. Circuit is tested with air flow greater than
500LFPM maintained.
100EL NECL DC Electrical Characteristics V_CC = 0.0V; V_EE = −5.0V (Note 6)
Symbol
Parameter
−40°C
25°C
85°C
Units
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
I_EE
Power Supply Current
18
22
18
22
21
26
mA
V_OH
Output HIGH Voltage (Note 7)
−1085 −1005 −880 −1025 −955 −880 −1025 −955 −880 mV
V_OL
Output LOW Voltage (Note 7)
−1830 −1695 −1555 −1810 −1705 −1620 −1810 −1705 −1620 mV
V_IH
Input HIGH Voltage (Single Ended) −1165
−880 −1165
−880 −1165
−880 mV
V_IL
Input LOW Voltage (Single Ended) −1810
−1475 −1810
−1475 −1810
-1475 mV
V_BB
Output Voltage Reference
−1.38
−1.26 −1.38
−1.26 −1.38
−1.26
V
V_IHCMR
Input HIGH Voltage Common Mode
Range (Differential) (Note 8)
−2.5
−0.4 −2.5
−0.4 −2.5
−0.4
V
I_IH
Input HIGH Current (Note 9)
150
150
150
µA
I_IL
Input LOW Current (Note 9)
0.5
0.5
0.5
µA
Note 6: Input and output parameters vary 1 to 1 with V_CC. V_EE can vary +0.8V/−0.5V.
Note 7: Outputs are terminated through a 50Ω Resistor to V_CC − 2.0V.
Note 8: V_IHCMR minimum varies 1 to 1 with V_EE. V_IHCMR maximum varies 1 to 1 with V_CC. The V_IHCMR range is referenced to the most positive side of the dif-
ferential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between V_PPMIN and
1V.
Note 9: Absolute value of the input HIGH and LOW current should not exceed the absolute value of the stated Min or Max specification.
www.fairchildsemi.com
2