100201 Datasheet, PDF (2/4 Pages) Fairchild Semiconductor – Low Power 2-Input OR/NOR Gate/Inverter

Absolute Maximum Ratings(Note 1)
Storage Temperature (T_STG)
Maximum Junction Temperature (T_J)
V_EE Pin Potential to Ground Pin
Input Voltage (DC)
Output Current (DC Output HIGH)
ESD (Note 2)
−65°C to +150°C
+150°C
−7.0V to +0.5V
V_EE to +0.5V
−50 mA
≥2000V
Recommended Operating
Conditions
Operating Temperature (T_C)
0°C to +85°C
Supply Voltage (V_EE)
−5.7V to −4.2V
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Commercial Version
DC Electrical Characteristics (Note 3)
V_EE = −4.2V to −5.7V, V_CC = GND, T_C = 0°C to +85°C
Symbol
Parameter
Min
Typ
Max
Units
Conditions
V_OH
Output HIGH Voltage
V_OL
Output LOW Voltage
−1025
−1830
−955
−1705
−870
−1620
mV
mV
V_IN = V_IH(Max) or V_IL(Min)
Loading with
50Ω to −2.0V
V_OHC
V_OLC
Output HIGH Voltage
Output LOW Voltage
−1035
−1610
mV
mV
V_IN = V_IH(Min) or V_IL(Max)
Loading with
50Ω to −2.0V
V_IH
Input HIGH Voltage
−1165
−870
mV Guaranteed HIGH Signal for All Inputs
V_IL
Input LOW Voltage
−1830
−1475
mV Guaranteed LOW Signal for All Inputs
I_IL
Input LOW Current
0.50
µA
V_IN = V_IL(Min)
I_IH
Input HIGH Current
240
µA
V_IN = V_IH(Max)
I_EE
Power Supply Current
−29
−17
−15
mA Inputs OPEN
Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional
noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are cho-
sen to guarantee operation under “worst case” conditions.
SOIC AC Electrical Characteristics
V_EE = −4.2V to −5.7V, V_CC = GND
Symbol
Parameter
T_C = 0°C
Min
Max
T_C = +25°C
Min
Max
T_C = +85°C
Min
Max
Units
t_PLH
Propagation Delay
t_PHL
Data to Output
0.4
1.10
0.4
1.15
0.4
1.20
ns
t_TLH
Transition Time
t_THL
20% to 80%, 80% to 20%
0.40
1.20
0.40
1.20
0.40
1.20
ns
Note 4: The propagation delay specified is for single output switching. Delays may vary up to 100 ps with multiple outputs switching.
Conditions
Figure 1Figure 2
(Note 4)
Figure 1Figure 2
www.fairchildsemi.com
2