|
FNA40560 Datasheet, PDF (10/15 Pages) Fairchild Semiconductor – Smart Power Module | |||
|
◁ |
Mechanical Characteristics and Ratings
Parameter
Device Flatness
Mounting Torque
Weight
Conditions
Note Figure 9
Mounting Screw: - M3
Note Figure 10
Recommended 0.7Nâ¢m
Recommended 7.1kgâ¢cm
Min.
0
0.6
6.2
-
Limits
Typ.
-
0.7
7.1
11
Max.
+120
0.8
8.1
-
Units
mm
Nâ¢m
kgâ¢cm
g
Figure 9. Flatness Measurement Position
Pre - Screwing : 1â2
Final Screwing : 2â1
2
1
Note:
9. Do not make over torque when mounting screws. Much mounting torque may cause ceramic cracks, as well as bolts and Al heat-sink destruction.
10. Avoid one side tightening stress. Fig.10 shows the recommended torque order for mounting screws. Uneven mounting can cause the SPM ceramic substrate to be damaged.
The Pre-Screwing torque is set to 20~30% of maximum torque rating.
Figure 10. Mounting Screws Torque Order
FNA40560 Rev. C
10
www.fairchildsemi.com
|
▷ |