XMT5 Datasheet, PDF (1/1 Pages) Fairchild Semiconductor – Vehicle Mount Terminal with Marvell® PXA 320 Processor

XMT 5
Vehicle Mount Terminal with
Marvell^® PXA 320 Processor
• 7" WVGA LED and 10.4" SVGA LED available
• Fully rugged, IP 67 for the complete system
• Advantech-DLoG-specific resistive touchscreen
• WLAN with integrated diversity antenna
• GPS/GPRS/HSDPA, WLAN, WWAN, CAN (optionally)
• Extreme temperature cycles
• Extreme shock & vibration
Introduction
With an extremely rugged housing (IP 67) DLoG XMT 5 is the ideal vehicle mount terminal for harbour and logistic applications. On cranes for container handling as well as
on forklifts in warehousing, the XMT 5 is the perfect companion, due to its application required interfaces: WLAN or WWAN, mobile positioning using GPS, CAN bus
systems or Ethernet.
Specifications
System
Housing
Dimensions/Weight
Display
CPU
Memory
XMT 5/7
XMT 5/10
XMT 5/7
XMT 5/10
Marvell^® PXA320 up to 806 MHz
256 MB SDRAM / 256 MB Flash
coated aluminium, fanless design
6.2 x 11.4 x 2.8 in, 2.2 kg / 4.8 lbs
11.2 x 9.1 x 3.2 in, 3.0 kg / 6.6 lbs
7" LED, WVGA 800 x 480, convertible design: portrait and landscape use
10.4" LED, SVGA 800 x 600
Touch Screen
Software
Operating System
Emulations
WLAN
DLoG-specific resistive Touch Screen
MS^® Windows^® CE 6.0
VT100, VT220, IBM 5250, TN 3270, Citrix ICA Client^®, RDP Client
IEEE 802.11 b/g, optionally
Communication
WWAN
GPS
GSM-Quadband 850/900/1800/1900, EDGE 2.5G, optionally
optionally
CAN Bus
optionally; ID: CAN 2.0A, CAN 2.0B, J1939 protocol ready
LAN
RJ45 10/100 Mbps
Interfaces
Serial
1 x RS-232 interface, optionally 2 x RS-232 or 1 x RS-232 and 1 x RS-422/485
COM 1 optionally 5 V or 12 V
USB
2 x USB 2.0 Host ; 1 x USB 2.0 Client; 1 x Service USB 2.0
Ports
up to 4 GB (SDHC) extended memory
Audio
Power Supply
DC
speaker integrated
12/24 or 24/48 VDC, galvanically isolated
voltage sags up to 5 VDC can be handled for up to 20 sec
IP protection class
IP 67 and IP 66 (contains IP 65 and IP 54)
Environmental
Certifications
Operating temperature
CE/FCC Class A
-30 to +50 °C / -22 to 122 °F
Relative humidity
10 to 90% @ 40 °C, non condensing
Shock/Vibration
Class 5M3 according DIN EN 60721-3-5 and MIL-STD 810F (US Highway Truck)
Information in this document is subject to change without prior notice. The software and hardware designations used in this text are in most cases
also registered trademarks and are thus subject to law.
www.advantech-dlog.com