SPT9713 Datasheet, PDF (1/7 Pages) Fairchild Semiconductor – 12-BIT, 100 MWPS TTL D/A CONVERTER

FEATURES
• 12-Bit, 100 MWPS digital-to-analog converter
• TTL compatibility
• Low power: 640 mW
• 1/2 LSB DNL
• 40 MHz multiplying bandwidth
• Industrial temperature range
• Superior performance over AD9713
– Improved settling time of 13 ns
– Improved glitch energy 15 pV-s
– Master-slave latches
SPT9713
12-BIT, 100 MWPS TTL D/A CONVERTER
TECHNICAL DATA
FEBRUARY 15, 2001
APPLICATIONS
• Fast frequency hopping spread spectrum radios
• Direct sequence spread spectrum radios
• Microwave and satellite modems
• Test & measurement instrumentation
GENERAL DESCRIPTION
The SPT9713 is a 12-bit, 100 MWPS digital-to-analog
converter designed for direct digital synthesis, high reso-
lution imaging, and arbitrary waveform generation applica-
tions.
This device is pin-for-pin compatible with the AD9713 with
significantly improved performance. The only difference
between the SPT9713 and the AD9713 is that the Latch
Enable (LE, pin 26) for the SPT9713 is rising-edge trig-
gered (see figure 1), whereas the Latch Enable (LE, pin
26) for the AD9713 functions in the transparent mode.
The SPT9713 is a TTL-compatible device. It features a
fast settling time of 13 ns and low glitch impulse energy of
15 pV-s, which results in excellent spurious-free dynamic
range characteristics.
The SPT9713 is available in a 28-lead PLCC package in
the industrial temperature range (–40 to +85 °C).
BLOCK DIAGRAM
R_Set
Control Amp In
Ref Out
Latch Enable
Digital
Inputs
D1
through
D12
+
Control
– ^Amp
Internal
Voltage
Reference
(MSB)
Decoders
and
Drivers
Switch
Network
(LSB)
Control
Amp Out
Ref In
I_Out
I_Out