QVE00120 Datasheet, PDF (1/5 Pages) Fairchild Semiconductor – OPTOLOGIC OPTICAL INTERRUPTER SWITCH

PACKAGE DIMENSIONS
QVE00120
OPTOLOGIC^® OPTICAL
INTERRUPTER SWITCH
.551 (14.00)
.236 (6.00)
.020 (.50)
.394 (10.00)
.295 (7.50) ^(2X)
+
E
CL
CL
D
CL
+
.197
(5.00)
OPTICAL
C.L.
.100 (2.50)
.027 (.70)
(2X)
.092 (2.35)
.160 (4.064)
(2X TYP)
.197 (5.00) MIN
(4X)
.260
(6.60)
.320 (8.128)
(TYP)
PINS
.020 (.51) (4x)
SQ. (TYP)
2
1
.100 (2.54) (2X)
(TYP)
PIN #1 (ANODE)
CL
3
4
5
KNOB
Ø.026 (.66)
(2X)
OPTICAL
C.L.
PIN #3 (VCC)
PIN #2 (CATHODE)
PIN #4 (VOUT)
PIN #5 (GND)
NOTES:
1. Dimensions for all drawings are in inches (millimeters).
2. Tolerance of ± .010 (.25) on all non-nominal dimensions
unless otherwise specified.
FEATURES
• No contact switching
• 5.0 mm wide slot
• 0.5 mm aperture width
• Opaque black plastic housing
• Output configuration: Buffer open-collector
• TTL/CMOS compatible output
• Locating knobs on housing base for accurate mounting
NOTES (Applies to Max Ratings and Characteristics Tables.)
1. Derate power dissipation linearly 1.67 mW/°C above 25°C.
2. Derate power dissipation linearly 2.50 mW/°C above 25°C.
3. RMA flux is recommended.
4. Methanol or isopropyl alcohols are recommended as
cleaning agents.
5. Soldering iron 1/16” (1.6mm) from housing.
6. As long as leads are not under any stress or spring tension.
ABSOLUTE MAXIMUM RATINGS (T_A = 25°C unless otherwise specified)
Parameter
Symbol
Rating
Operating Temperature
Storage Temperature
Lead Temperature (Solder Iron)^(3,4,5,6)
Lead Temperature (Solder Flow)^(3,4,5,6)
EMITTER
T_OPR
T_STG
T_SOL-I
T_SOL-F
-40 to +85
-40 to +85
240 for 5 sec
260 for 10 sec
Continuous Forward Current
Reverse Voltage
Power Dissipation⁽¹⁾
SENSOR
I_F
50
V_R
5
P_D
100
Output Current
Supply Voltage
Output Voltage
Power Dissipation⁽²⁾
I_O
50
V_CC
16
V_O
30
P_D
150
1 of 5
Units
°C
°C
°C
°C
mA
V
mW
mA
V
V
mW
100029B