QVE00112 Datasheet, PDF (1/5 Pages) Fairchild Semiconductor – OPTOLOGIC OPTICAL INTERRUPTER SWITCH

PACKAGE DIMENSIONS
0.714
(18.150)
0.123
(3.125)
0.014 (0.356)
Ø 3.300
0.316
(8.025)
0.173
(4.400)
0.327
(8.310)
OPTICAL CL
0.246 0.276
(6.250) _(7.012)
0.118
(3.000)
0.173
(4.400)
0.102
(2.600)
0.327
(8.310)
QVE00112
OPTOLOGIC^® OPTICAL
INTERRUPTER SWITCH
0.100 (2.540)
13.78 (350) ± 0.275 (7)
GREEN (GND)
WHITE (VOUT)
GRAY (VCC)
GRN WHT GRY
0.464
(11.800)
NOTES:
0.143
(3.625)
1. Dimensions for all drawings are in inches (millimeters).
2. Tolerance of ± .010 (.25) on all non-nominal dimensions
unless otherwise specified.
3. Wire gauge: 24 AWG, 7 strand, pre-tinned copper.
FEATURES
• No contact switching
• Mounting tab
• Wire leads for remote connection
• 3 mm slot
• Output configuration: Inverter open-collector
• TTL/CMOS compatible output
• Aperture width: .014”
NOTES (Applies to Max Ratings and Characteristics Tables.)
1. Derate power dissipation linearly 1.67 mW/°C above 25°C.
2. Derate power dissipation linearly 2.50 mW/°C above 25°C.
3. RMA flux is recommended.
4. Methanol or isopropyl alcohols are recommended as
cleaning agents.
ABSOLUTE MAXIMUM RATINGS (T_A = 25°C unless otherwise specified)
Parameter
Symbol
Rating
Operating Temperature
Storage Temperature
Soldering Temperature (Iron)^(3,4)
EMITTER
T_OPR
T_STG
T_SOL-I
-40 to +85
-40 to +85
240 for 5 sec
Continuous Forward Current
Reverse Voltage
Power Dissipation⁽¹⁾
SENSOR
I_F
50
V_R
5
P_D
100
Output Current
Supply Voltage
Output Voltage
Power Dissipation⁽²⁾
I_O
50
V_CC
16
V_O
30
P_D
150
1 of 5
Units
°C
°C
°C
mA
V
mW
mA
V
V
mW
100017B