QSE773 Datasheet, PDF (1/4 Pages) QT Optoelectronics – PLASTIC SILICON PIN PHOTODIODE

QSE773
PLASTIC SILICON PIN PHOTODIODE
PACKAGE DIMENSIONS
0.215 (5.46)
CL
0.199 (5.06)
0.311 (7.90)
0.288 (7.30)
0.126 (3.20)
0.110 (2.80)
FEATURES
• Daylight Filter
• Sidelooker Package
• Pin Photodiode
• Wide Reception Angle, 120°
• Chip Size = .107² inches (2.71² mm)
0.610 (15.49)
MIN
ANODE
0.020 (0.51)
SQ. (2x)
SENSING
SURFACE
0.060 (1.52)
0.100 (2.54)
0.116 (2.95)
0.100 (2.54)
NOTES:
1. Dimensions for all drawings are in inches (mm).
2. Tolerance of ± .010 (.25) on all non-nominal dimensions
unless otherwise specified.
SCHEMATIC
ANODE
CATHODE
1. Derate power dissipation linearly 2.50 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as cleaning
agents.
4. Soldering iron 1/16” (1.6mm) minimum from housing.
5. As long as leads are not under any stress or spring tension.
6. Light source is an GaAs LED which has a peak emission
wavelength of 940 nm.
7. All measuements made under pulse conditions.
ABSOLUTE MAXIMUM RATINGS ^(T_A ^{= 25°C unless otherwise specified)}
Parameter
Operating Temperature
Storage Temperature
Soldering Temperature (Iron)(2,3,4,5)
Soldering Temperature (Flow)(2,3,5)
Reverse Voltage
Power Dissipation(1)
Symbol
T_OPR
T_STG
T_SOL-I
T_SOL-F
V_R
P_D
Rating
-40 to +85
-40 to +85
240 for 5 sec
260 for 10 sec
32
150
1 of 4
Unit
°C
°C
°C
°C
V
mW
100032C