P6KE6V8A Datasheet, PDF (1/3 Pages) STMicroelectronics – UNI AND BIDIRECTIONAL TYPES, PEAK PULSEPOWER : 600W

Transient Voltage Suppressors
P6KE6V8(C)A - P6KE440(C)A
Features
• Glass passivated junction.
• 600W Peak Pulse Power capability at
1.0 ms.
• Excellent clamping capability.
• Low incremental surge resistance.
• Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
• Typical I_R less than 1.0 µA above 10V.
DO-15
COLOR BAND DENOTES CATHODE
ON UNIDIRECTIONAL DEVICES ONLY. NO
COLOR BAND ON BIDIRECTIONAL DEVICES.
DEVICES FOR BIPOLAR APPLICATIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
600 Watt Transient Voltage Suppressors
Absolute Maximum Ratings* T_A = 25°C unless otherwise noted
Symbol
Parameter
Value
P_PPM
I_PPM
P_D
I_FSM
T_stg
T_J
Peak Pulse Power Dissipation at T_P=1ms
Peak Pulse Current
Power Dissipation
.375 " lead length @ T_A = 75°C
Non-repetitive Peak Forward Surge Current
superimposed on rated load (JEDEC method)
Storage Temperature Range
(Note 1)
Operating Junction Temperature
600
see table
5.0
100
-65 to +175
+ 175
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave; Duty cycle = 4 pulses per minute maximum.
Units
W
A
W
A
°C
°C
2002 Fairchild Semiconductor Corporation
P6KE6V8(C)A - P6KE440(C)A, Rev. D