NC7SZ66_10 Datasheet, PDF (1/9 Pages) Fairchild Semiconductor – Low Voltage Single SPST Normally Open Bus Switch

December 2010
NC7SZ66
Low Voltage Single SPST Normally Open Bus Switch
Features
ƒ Broad VCC Operating Range: 1.65V to 5.5V
ƒ Rail-to-Rail Signal Handling
ƒ Power Down High-Impedance Inputs/Outputs
ƒ 5Ω Switch Connection between Two Ports
ƒ Minimal Propagation Delay through the Switch
ƒ Low ICC
ƒ Zero Bounce in Flow-Through Mode
ƒ Control Input Compatible with CMOS Input Levels
ƒ Ultra-Small MicroPak™ Packages
ƒ Space-Saving SOT23 and SC70 Packages
Description
The NC7SZ66 is a ultra high-speed (UHS) CMOS
compatible single-pole/single-throw (SPST) bus switch.
The LOW on resistance of the switch allows inputs to
be connected to out-puts with minimal propagation
delay and without generating additional ground bounce
noise. The device is organized as a 1- bit switch with a
switch enable (OE) signal. When OE is HIGH, the
switch is on and port A is connected to port B. When
OE is LOW, the switch is open and a high-impedance
state exists between the two ports..
Ordering Information
Part Number
NC7SZ66M5X
NC7SZ66P5X
NC7SZ66L6X
Top Mark
7Z66
Z66
EE
Package
5-Lead SOT23, JEDEC MO-178 1.6mm
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
6-Lead, MicroPak™, 1x1mm Wide
Packing Method
3000 Units on Tape & Reel
3000 Units on Tape & Reel
5000 Units on Tape & Reel
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.4
www.fairchildsemi.com