 English |
|
|
|
|
|
|
|
| MMBT4354 Datasheet, PDF (1/4 Pages) Fairchild Semiconductor – PNP General Purpose Amplifier | |||
| |||
|
MMBT4354
PNP General Purpose Amplifier
⢠This device is deisgned for use as general purpose amplifiers and
switch requiring collector currents to 500mA.
⢠Sourced from process 67.
⢠TN4033A for characteristics.
3
2
Absolute Maximum Ratings* Ta=25°C unless otherwise noted
Symbol
Parameter
VCEO
Collector-Emitter Voltage
VCBO
Collector-Base Voltage
VEBO
Emitter-Base Voltage
IC
Collector Current
- Continuous
TJ, TSTG
Operating and Storage Junction Temperature Range
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
1
SOT-23
Mark: 79
1. Base 2. Emitter 3. Collector
Value
-60
-60
-5.0
-800
- 55 ~ 150
Units
V
V
V
mA
°C
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations
Electrical Characteristics Ta=25°C unless otherwise noted
Symbol
Parameter
Test Condition
Off Characteristics
V(BR)CEO
Collector-Emitter Sustaining Voltage *
V(BR)CBO
Collector-Base Breakdown Voltage
V(BR)EBO
Emitter-Base Breakdown Voltage
ICBO
Collector Cut-off Current
IEBO
Emitter Cut-off Current
On Characteristics *
IC = -1.0mA, IB = 0
IC = -10µA, IE = 0
IE = -10µA, IC = 0
VCB = -50V, IE = 0
VEB = -5.0V, VCE = 0
hFE
DC Current Gain
VCE(sat)
Collector-Emitter Saturation Voltage
VBE(sat)
Base-Emitter Saturation Voltage
VBE(on)
Base-Emitter On Voltage
Small Signal Characteristics
VCE = -5V, IC = -0.1mA
VCE = -5V, IC = -1.0mA
VCE = -5V, IC = -10mA
VCE = -5V, IC = -100mA
VCE = -5V, IC = -500mA
IC = -150mA, IB = -15mA
IC = -500mA, IB = -50mA
IC = -150mA, IB = -15mA
IC = -500mA, IB = -50mA
VCE = -0.5V, IC = -500mA
hfe
Small Signal Current Gain
IC = -50mA, VCE = -10V,
f = 100MHz
NF
Noise Figure
Switching Characteristics
VCE = -10V, IC = -100µA
RS = 1.0kâ¦, f = 1.0KHz,
BW = 1.0Hz
ton
Turn-On Time
toff
Turn-Off Time
* Pulse Test: Pulse Width ⤠300µs, Duty Cycle ⤠1.0%
IC = -500mA, VCC = -30V
IB1 = IB2 = -50mA
Min. Max. Units
-60
V
-60
V
-5.0
V
-50
nA
-10
µA
25
40
50
500
40
30
-0.15
V
-0.50
V
-0.9
V
-1.1
V
-1.1
V
1.0
5.0
2.0
dB
100
ns
400
ns
©2003 Fairchild Semiconductor Corporation
Rev. A, October 2003
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese