|
MM74HC148 Datasheet, PDF (1/8 Pages) Fairchild Semiconductor – 8-3 Line Priority Encoder | |||
|
October 1987
Revised February 1999
MM74HC148
8-3 Line Priority Encoder
General Description
The MM74HC148 priority encoder utilizes advanced sili-
con-gate CMOS technology. It has the high noise immunity
and low power consumption typical of CMOS circuits, as
well as the speeds and output drive similar to LB-TTL.
This priority encoder accepts 8 input request lines 0â7 and
outputs 3 lines A0âA2. The priority encoding ensures that
only the highest order data line is encoded. Cascading cir-
cuitry (enable input EI and enable output EO) has been
provided to allow octal expansion without the need for
external circuitry. All data inputs and outputs are active at
the low logic level.
All inputs are protected from damage due to static dis-
charge by internal diode clamps to VCC and ground.
Features
s Typical propagation delay: 13 ns
s Wide supply voltage range: 2Vâ6V
Ordering Code:
Order Number Package Number
Package Description
MM74HC148M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150â Narrow
MM74HC148MTC
MTC16
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HC148N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300â Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter âXâ to the ordering code.
Connection Diagram
Truth Table
Pin Assignments for DIP, SOIC and TSSOP
Inputs
Outputs
EI 0 1 2 3 4 5 6 7 A2 A1 A0 GS EO
HXXXXXXXX H H H H H
L HHHHHHHH H H H H L
L XXXXXXXL L L L L H
L XXXXXXLH L L H L H
L XXXXX LHH L H L L H
L XXXX LHHH L H H L H
L XXX LHHHH H L L L H
L XX LHHHHH H L H L H
L X LHHHHHH H H L L H
L LHHHHHHH H H H L H
H = HIGH
L = LOW
X = Irrelevant
© 1999 Fairchild Semiconductor Corporation DS009390.prf
www.fairchildsemi.com
|
▷ |