ISL9R1560PF2 Datasheet, PDF (1/6 Pages) Fairchild Semiconductor – 15A, 600V Stealth Diode

April 2003
ISL9R1560PF2
15A, 600V Stealth™ Diode
General Description
The ISL9R1560PF2 is a Stealth™ diode optimized for
low loss performance in high frequency hard switched
applications. The Stealth™ family exhibits low reverse
recovery current (I_RM(REC)) and exceptionally soft
recovery under typical operating conditions.
This device is intended for use as a free wheeling or
boost diode in power supplies and other power
switching applications. The low I_RM(REC) and short t_a
phase reduce loss in switching transistors. The soft
recovery minimizes ringing, expanding the range of
conditions under which the diode may be operated
without the use of additional snubber circuitry. Consider
using the Stealth™ diode with an SMPS IGBT to
provide the most efficient and highest power density
design at lower cost.
Formerly developmental type TA49410.
Package
TO-220F
Features
• Soft Recovery . . . . . . . . . . . . . . . . . . . . . . t_b / t_a > 1.2
• Fast Recovery. . . . . . . . . . . . . . . . . . . . . . . t_rr < 30ns
• Operating Temperature. . . . . . . . . . . . . . . . . . 150^oC
• Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . 600V
• Internally Isolated . . . . . . . . . . . . . . . . . . . . . . . . 1kV
• Avalanche Energy Rated
Applications
• Switch Mode Power Supplies
• Hard Switched PFC Boost Diode
• UPS Free Wheeling Diode
• Motor Drive FWD
• SMPS FWD
• Snubber Diode
Symbol
K
A
CATHODE _ANODE
Device Maximum Ratings T_C = 25°C unless otherwise noted
Symbol
Parameter
Ratings
Units
V_RRM
V_RWM
V_R
I_F(AV)
I_FRM
I_FSM
P_D
E_AVL
T_J, T_STG
T_L
Repetitive Peak Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current (T_C = 25^oC)
Repetitive Peak Surge Current (20kHz Square Wave)
Nonrepetitive Peak Surge Current (Halfwave 1 Phase 60Hz)
Power Dissipation
Avalanche Energy (1A, 40mH)
Operating and Storage Temperature Range
Maximum Temperature for Soldering
Leads at 0.063in (1.6mm) from Case for 10s
600
V
600
V
600
V
15
A
30
A
200
A
30
W
20
mJ
-55 to 150
°C
300
°C
CAUTION: Stresses above those listed in “Device Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and
operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
©2003 Fairchild Semiconductor Corporation
ISL9R1560PF2 Rev. A1