FUSB2805 Datasheet, PDF (1/5 Pages) Fairchild Semiconductor – USB2.0 High-Speed OTG Transceiver with ULPI Interface

October 2010
FUSB2805
USB2.0 High-Speed OTG Transceiver with ULPI Interface
Features
ƒ Complies with USB 2.0, OTG Rev 1.3 Supplement,
and ULPI Rev 1.1 Specifications
ƒ Supports 480 Mbps, 12Mbps, and 1.5Mbps USB2.0
Speeds
- Integrated Termination Resistors Meet USB2.0
Resistor ECN
- Integrated Serializer and Deserializer
- Insertion and Removal of Stuffed Bits
as Appropriate
- USB Clock and Data Recovery to ±150ppm
ƒ Supports USB OTG Rev 1.3 Host Negotiation
Protocol (HNP) and Session Request Protocol
(SRP)
ƒ 15KV ESD, IEC 61000 Board Level, Air Gap
Applications
ƒ Set-Top Box Video Camera, MP3 Player
ƒ Cell Phone, Digital Still Camera, PDA
ƒ DVD Recorder, Scanner, Printer
Description
The FUSB2805 is a UTMI+ Low-Pin Interface (ULPI)
USB2.0 OTG transceiver. It is compliant with the
Universal Serial Bus Specification Rev 2.0 (USB2.0),
the ULPI Specification Rev. 1.1, and the On-The-Go
(OTG) supplement to USB2.0, Rev. 1.3.
The FUSB2805 is optimized to connect the USB2.0
host, peripheral, or OTG-controller to the USB
connector via the ULPI link. Data can be transmitted
and received at high speed (480Mbps), full speed
(12Mbps), and low speed (1.5Mbps) through a 12-bit
(SDR) interface.
Related Resources
UTMI+ Low Pin Interface Specification (ULPI), Revision
1.1, October 20, 2004. http://www.ulpi.org
UTMI+ Specification, Revision 1.0, February 22, 2004.
http://www.ulpi.org
For additional performance information, please contact
[e-mail].
Ordering Information
Part Number
FUSB2805MLX
Top Mark
FUSB2805
Operating Temperature Range
Package
-40 to +85°C
32-Terminal, Molded Leadless
Package (MLP), Quad, JEDEC MO-220
© 2008 Fairchild Semiconductor Corporation
FUSB2805 • Rev. 1.0.1
www.fairchildsemi.com