FUSB2500 Datasheet, PDF (1/7 Pages) Fairchild Semiconductor – USB2.0 High-Speed OTG Transceiver with ULPI Interface

April 2010
FUSB2500
USB2.0 High-Speed OTG Transceiver with ULPI Interface
Features
ƒ Complies with USB 2.0 OTG Rev 1.3 Supplement
and ULPI Rev 1.1 Specifications
ƒ Supports 480Mbps, 12Mbps, and 1.5Mbps USB2.0
Speeds
- Integrated Termination Resistors Meet USB2.0
Resistor ECN
- Integrated Serializer and Deserializer
- Insertion and Removal of Stuffed Bits as
Appropriate
- USB Clock and Data Recovery to ±150ppm
ƒ Supports USB OTG Rev 1.3 Host Negotiation
Protocol (HNP) and Session Request Protocol
(SRP)
Applications
ƒ Cell phones, Digital Still Camera, PDA
ƒ DVD Recorder, Scanner, Printer
ƒ Video Camera, Set-Top Box, MP3 Player
IMPORTANT NOTE:
For additional performance information, please contact
[e-mail].
Description
The FUSB2500 is a UTMI+ Low-Pin Interface (ULPI)
USB2.0 On-The-Go (OTG) transceiver. It is compliant
with the Universal Serial Bus Specification Rev 2.0
(USB2.0), the ULPI Specification Rev. 1.1, and the
OOTG Supplement to USB2.0, Rev. 1.3.
The FUSB2500 is optimized to connect the USB2.0
host, peripheral, or OTG-controller to the USB
connector via the ULPI link. Data can be transmitted
and received at high speed (480Mbps), full speed
(12Mbps), and low speed (1.5Mbps) through a 12-bit
(SDR) interface.
The FUSB2500 also includes a charger-detection
functional block that enables automatic detection for
charging USB2.0 host ports or dedicated chargers. The
FUSB2500 is compliant with Battery Charging
Specification Rev. 1.0.
Related Resources
ƒ UTMI+ Low Pin Interface Specification (ULPI),
Revision 1.1, October 20, 2004. http://www.ulpi.org
ƒ UTMI+ Specification, Revision 1.0, February 22,
2004. http://www.ulpi.org
Ordering Information
Part Number
FUSB2500GFX
Top Mark
FUSB2500
Operating Temperature Range
Package
-40 to +85°C
36-Ball, Ball Grid Array (BGA), 3.5 x 3.5 x
1.0mm, 0.5mm Pitch
© 2010 Fairchild Semiconductor Corporation
FUSB2500 • Rev. 1.0.0
www.fairchildsemi.com