|
FT7521 Datasheet, PDF (1/9 Pages) Fairchild Semiconductor – Reset Timer with Fixed Delay and Reset Pulse | |||
|
September 2012
FT7521
Reset Timer with Fixed Delay and Reset Pulse
Features
ï§ Fixed Reset Delay: 7.5 Seconds
ï§ One Input Reset Pin
ï§ Open-Drain Output Pin with Fixed 400ms Pulse
ï§ 1.8 V to 5.0 V Operation (TA=-40°C to +85°C)
ï§ 1.7 V to 5.0 V Operation (TA=-25°C to +85°C)
ï§ 1.65 V to 5.00 V Operation (TA=0°C to +85°C)
ï§ <1 µA ICCQ Consumption
ï§ Zero-Second Test-Mode Enable
ï§ Integrated Pull-Up Resistor on /SRO
Applications
ï§ Cell Phones
ï§ Portable Media Players
ï§ Tablets
ï§ Mobile Devices
ï§ Consumer Medical
Description
The FT7521 is a timer for resetting a mobile device
where long reset times are needed. The long delay
helps avoid unintended resets caused by accidental key
presses. It has a fixed delay of 7.5 ±20% seconds. The
DSR pin enables Test Mode operation by immediately
forcing /RST1 LOW for factory testing.
The FT7521 has one input for single-button resetting
capability. The device has a single open-drain output
with 0.5 mA pull-down drive.
FT7521 draws minimal ICC current when inactive and
functions over a power supply range of 1.65 V to 5.0 V.
Figure 1. Block Diagram
Ordering Information
Part Number
FT7521L6X
FT7521FHX
(Preliminary)
Operating
Temperature Range
Package
-40ï°C to +85ï°C
6-Lead, MicroPak⢠1.0 x 1.45 mm, JEDEC MO-252
6-Lead, MicroPak2⢠1.0 x 1.0 mm Body, .35 mm Pitch
Packing
Method
5000 Units on
Tape and Reel
© 2009 Fairchild Semiconductor Corporation
FT7521 ⢠Rev. 1.0.7
www.fairchildsemi.com
|
▷ |