FT3001 Datasheet, PDF (1/10 Pages) Fairchild Semiconductor – Reset Timer with Configurable Delay

October 2012
FT3001
Reset Timer with Configurable Delay
Features
 Delay Times: 3.0, 3.75, 4.5, 6.0 Seconds
 ≤ 1 µA I_CC Current Consumption in Standby
 Primary and Secondary Input Reset Pins
 Push-Pull and Open-Drain Output Pins
 1.65 V to 5.0 V Operation at T_A = 0C to +85C
 1.7 V to 5.0 V Operation at T_A = 0C to +85C
 1.8 V to 5.0 V Operation at T_A = -40C to +85C
 Available in 8-Lead MLP and 10-Lead UMLP
Packages
 ESD Protection Exceeds:
- 4 kV HBM
(per JESD22-A114 & Mil Std 883e 3015.7)
- 2 kV CDM (per ESD STM 5.3)
Description
The FT3001 is a timer for resetting a mobile device
where long reset times are needed. The long delay
helps avoid unintended resets caused by accidental key
presses. Four timer values can be selected by hard-
wiring the DSR0 and DSR1 pins.
The FT3001 has two inputs for single- or dual-button
resetting capability. The device has two outputs: a push-
pull output with 0.5 mA drive and an open-drain output
with 0.5 mA pull-down drive.
The FT3001 draws minimal supply current when
inactive and functions over a power supply range of
1.65 V to 5.0 V.
Figure 1. Block Diagram
Ordering Information
Part Number
FT3001UMX
FT3001MPX
Operating
Temperature Range
-40C to +85C
-40C to +85C
Package
Packing Method
10-Lead, Ultrathin MLP, 1.4 x 1.8 x 0.55mm
Package, 0.40 mm Pitch
8-Lead, Molded Leadless Package (MLP),
Dual JEDEC, MO-229 2.0 x 2.0 mm
5000 Units
Tape and Reel
3000 Units
Tape and Reel
© 2011 Fairchild Semiconductor Corporation
FT3001 • Rev. 1.0.4
www.fairchildsemi.com