FSUSB63 Datasheet, PDF (1/3 Pages) Fairchild Semiconductor – 3:1 High-Speed USB 2.0 Switch / Multiplexer

July 2012
FSUSB63 — 3:1 High-Speed USB 2.0 Switch / Multiplexer
Features
Switch Type
USB
Break-Before-Make Time
R_ON
C_ON
Bandwidth
V_CC
V_CNTRL
Operating Temperature
I_CCSLP
I_CCACT
Package
Top Mark
Ordering Information
3:1 USB Switch
USB 2.0 High-Speed &
Full-Speed Compliant
126µs
6Ω Typical
6pF Typical
830MHz
2.7 to 4.4V
0 to V_CC
-40°C to 85°C
<1µA
7.5µA Typical
12- Lead UMLP 1.80 x 1.80 x
0.55mm, 0.40mm pitch
KG
FSUSB63UMX
Applications
 Cell Phone, Digital Camera, Notebook
 LCD Monitor, TV, and Set-Top Box
 Netbook, Mobile Internet Device (MID)
Description
The FSUSB63 is a bi-directional, low-power, High-Speed
(HS) USB 2.0 3:1 Multiplexer (MUX). It is optimized for
switching among three high-speed (480Mbps) sources or
any combination of high-speed and full-speed (12Mbps)
USB sources, such as an application processor, to one USB
2.0 connector.
The FSUSB63 has a break-before-make time to force re-
enumeration by the host when switching between different
HS USB 2.0 controllers and thus requires minimal software
changes.
The FSUSB63 is compliant with the requirements of USB 2.0
and features extremely low on capacitance (C_ON). The wide
bandwidth exceeds the requirement to pass the third
harmonic, resulting in signals with minimum edge and phase
distortion. Superior channel-to-channel crosstalk also
minimizes interference.
Related Resources
 For samples and questions, please contact:
[e-mail].
 FSUSB63 Demonstration Board
Typical Application
© 2010 Fairchild Semiconductor Corporation
FSUSB63 • Rev. 1.0.4
Figure 1. Analog Symbol
www.fairchildsemi.com