FSUSB104 Datasheet, PDF (1/2 Pages) Fairchild Semiconductor – Low-Power, Two-Port, Hi-Speed, USB2.0 (480Mbps) Switch

June 2008
FSUSB104 — Low-Power, Two-Port, Hi-Speed,
USB2.0 (480Mbps) Switch
Features
ƒ Low On Capacitance: 3.7pF Typical
ƒ Low On Resistance: 3.9Ω Typical
ƒ Low Power Consumption: 1μA Maximum
- 15μA Maximum ICCT over an Expanded Voltage
Range (VIN=1.8V, VCC=4.3V)
ƒ Wide -3db Bandwidth: > 720MHz
ƒ Packaged in Pb-free 10-Lead UMLP (1.4 x 1.8mm)
ƒ 8kV ESD Rating, >16kV Power/GND ESD Rating
ƒ Power-Off Protection on All Ports When VCC=0V
- D+/D- Pins Tolerate up to 5.25V
Applications
ƒ Cell phone, PDA, Digital Camera, and Notebook
ƒ LCD Monitor, TV, and Set-Top Box
IMPORTANT NOTE:
For additional performance information, please contact
[e-mail].
Description
The FSUSB104 is a bi-directional, low-power, two-port,
Hi-Speed, USB2.0 switch. Configured as a double-pole,
double-throw switch (DPDT) switch, it is optimized for
switching between two Hi-Speed (480Mbps) sources or
a Hi-Speed and Full-Speed (12Mbps) source.
The FSUSB104 is compatible with the requirements of
USB2.0 and features an extremely low on capacitance
(CON) of 3.7pF. The wide bandwidth of this device
(720MHz) exceeds the bandwidth needed to pass the
third harmonic, resulting in signals with minimum edge
and phase distortion. Superior channel-to-channel
crosstalk also minimizes interference.
The FSUSB104 contains special circuitry on the switch
I/O pins for applications where the VCC supply is
powered-off (VCC=0), which allows the device to
withstand an over-voltage condition. This device is
designed to minimize current consumption even when
the control voltage applied to the SEL pin is lower than
the supply voltage (VCC). This feature is especially
valuable to ultra-portable applications, such as cell
phones, allowing for direct interface with the general-
purpose I/Os of the baseband processor. Other
applications include switching and connector sharing in
portable cell phones, PDAs, digital cameras, printers,
and notebook computers.
Ordering Information
Part Number
Top
Mark
Operating
Temperature
Range
Eco Status
FSUSB104UMX JF
-40 to +85°C
Green
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
Package
10-Lead, Quad, Ultrathin Molded Leadless
Package (UMLP), 1.4 x 1.8mm
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
HSD1+
D+
HSD2+
HSD1-
D-
HSD2-
Sel Control /OE
© 2008 Fairchild Semiconductor Corporation
FSUSB104 • Rev. 1.0.1
Figure 1. Analog Symbol
www.fairchildsemi.com