|
FSL206MR Datasheet, PDF (1/14 Pages) Fairchild Semiconductor – Green Mode Fairchild Power Switch (FPS™) | |||
|
September 2012
FSL206MR
Green Mode Fairchild Power Switch (FPSâ¢)
Features
ï§ Internal Avalanche-Rugged SenseFET: 650V
ï§ Precision Fixed Operating Frequency: 67kHz
ï§ No-Load <150mW at 265VAC without Bias Winding;
<25mW with Bias Winding for FSL206MR, <30mW
with Bias Winding for FSL206MRBN
ï§ No Need for Auxiliary Bias Winding
ï§ Frequency Modulation for Attenuating EMI
ï§ Line Under-Voltage Protection (LUVP)
ï§ Pulse-by-Pulse Current Limiting
ï§ Low Under-Voltage Lockout (UVLO)
ï§ Ultra-Low Operating Current: 300µA
ï§ Built-In Soft-Start and Startup Circuit
ï§ Various Protections: Overload Protection (OLP),
Over-Voltage Protection (OVP), Thermal Shutdown
(TSD), Abnormal Over-Current Protection (AOCP)
Auto-Restart Mode for All Protections
Applications
ï§ SMPS for STB, DVD, and DVCD Player
ï§ SMPS for Auxiliary Power
Description
The FSL206MR integrated Pulse-Width Modulator
(PWM) and SenseFET is specifically designed for high-
performance offline Switched-Mode Power Supplies
(SMPS) while minimizing external components. This
device integrates high-voltage power regulators that
combine an avalanche-rugged SenseFET with a
Current-Mode PWM control block.
The integrated PWM controller includes: a 7.8V
regulator, eliminating the need for auxilliary bias
winding; Under-Voltage Lockout (UVLO) protection;
Leading-Edge Blanking (LEB); an optimized gate turn-
on/turn-off driver; EMI attenuator; Thermal Shutdown
(TSD) protection; temperature-compensated precision
current sources for loop compensation; soft-start during
startup; and fault-protection circuitry such as Overload
Protection (OLP), Over-Voltage Protection (OVP),
Abnormal Over-Current Protection (AOCP), and Line
Under-Voltage Protection (LUVP).
The internal high-voltage startup switch and the Burst-
Mode operation with very low operating current reduce
the power loss in Standby Mode. As a result, it is
possible to reach a power loss of 150mW with no bias
winding and 25mW (for FSL206MR) or 30mW (for
FSL206MRBN) with a bias winding under no-load
conditions when the input voltage is 265VAC.
Related Resources
ï§ Fairchild Power Supply WebDesigner â Flyback
Design and Simulation â In Minutes at No Expense
ï§ AN-4137 â Design Guidelines for Offline Flyback
Converters Using FPSâ¢
ï§ AN-4141 â Troubleshooting and Design Tips for
Fairchild Power Switch (FPSâ¢) Flyback
Applications
ï§ AN-4147 â Design Guidelines for RCD Snubber of
Flyback
ï§ AN-4150 â Design Guidelines for Flyback
Converters Using FSQ-Series Fairchild Power
Switch (FPSâ¢)
© 2011 Fairchild Semiconductor Corporation
FSL206MR ⢠Rev. 1.0.5
www.fairchildsemi.com
|
▷ |