|
FSAL200_07 Datasheet, PDF (1/11 Pages) Fairchild Semiconductor – Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch | |||
|
October 2007
FSAL200 â Wide Bandwidth Quad 2:1 Analog
Multiplexer / De-multiplexer Switch
Features
 Typical 6Ω Switch Connection Between Two Ports
 Minimal Propagation Delay Through the Switch
 Low ICC
 Zero Bounce in Flow-Through Mode
 Control Inputs Compatible with TTL Level
 Rail-to-Rail Signal Handling
 Route Communications Signals Include:
- 10/100 Ethernet
- 100VGâAnyLAN
- ATM25
- SONET OCI 51.8Mbps
- USB1.1
- T1/E1
- Token Ring 4/16Mbps
Description
The Fairchild Switch FSAL200 is a rail-to-rail quad 2:1
high-speed CMOS TTL-compatible analog multiplexer /
de-multiplexer switch. The low on resistance of the
switch allows inputs to be connected to outputs without
adding propagation delay or generating additional
ground bounce noise.
When OE is low, the select pin connects the A Port to
the selected B Port output. When OE is high, the switch
is open and a high-impedance state exists between the
two ports.
Ordering Information
Part Number
Package Description
FSAL200MTC 16-Lead Thin Shrink Small Outline Package(TSSOP), JEDEC MO-153, 4.4mm Wide
FSAL200MTCX 16-Lead Thin Shrink Small Outline Package(TSSOP), JEDEC MO-153, 4.4mm Wide
FSAL200QSC 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide
FSAL200QSCX 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide
Packing
Method
Rails
Tape and
Reel
Rails
Tape and
Reel
All packages are Pb-free per JEDEC standard J-SDD-020B.
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
www.fairchildsemi.com
|
▷ |