FSAL200_06 Datasheet, PDF (1/10 Pages) Fairchild Semiconductor – Wide Bandwidth Quad 2:1 Analog Multiplexer / Demultiplexer Switch

FSAL200 Wide Bandwidth Quad 2:1 Analog
Multiplexer / Demultiplexer Switch
June 2006
Features
■ Typical 6Ω switch connection between two ports
■ Minimal propagation delay through the switch
■ Low I_CC
■ Zero bounce in flow-through mode
■ Control inputs compatible with TTL level
■ Rail-to-rail signal handling
■ Low insertion loss
■ Route communications signals include:
• 10/100 Ethernet
• 100VG-AnyLAN
• ATM25
• SONET OCI 51.8 Mbps
• USB1.1
• T1/E1
• Token Ring 4/16 Mbps
Description
The Fairchild Switch FSAL200 is a rail-to-rail quad 2:1
high-speed CMOS TTL-compatible analog multiplexer/
demultiplexer switch. The low On Resistance of the
switch allows inputs to be connected to outputs without
adding propagation delay or generating additional
ground bounce noise.
When OE is LOW, the select pin connects the A Port to
the selected B Port output. When OE is HIGH, the switch
is OPEN and a high-impedance state exists between the
two ports.
Ordering Information
Package
Part Number Number Pb-Free
Package
FSAL200QSC MQA16
Yes 16-Lead Quarter Size Outline Package (QSOP),
JEDEC MO-137, 0.150" Wide
FSAL200MTC MTC16
Yes 16-Lead Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide
This device is also available in tape and reel. To order, append X to the part number.
Packing Method
© 2002 - 2006 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.0
www.fairchildsemi.com