FPF2411 Datasheet, PDF (1/13 Pages) Fairchild Semiconductor – Switch with Slew Rate Control and RCB

April 2015
FPF2411 — IntelliMAX™ 6 V / 6 A - Rated Bi-Directional
Switch with Slew Rate Control and RCB
Features
 Capability: 6 V
 Low RON
- 10 mΩ at 5 V at PWRA or PWRB (Typ.)
- 12 mΩ at 3.8 V at PWRA or PWRB (Typ.)
 Maximum Current Capability: 6 A (Bi-Directional)
 Ultra-Low IQ:<1 µA
 Active LOW Control Pin
 2 ms Long Slew Rate
 Reverse Current Blocking (RCB) during OFF
 Robust ESD Capability:
- 5 kV HBM, 2 kV CDM
- 15 kV Air Discharge
- 8 kV Contact Discharge Under IEC 61000-4-2
Applications
 Smartphone / Tablet PC
 Mobile Devices
 Portable Media Devices
Description
The FPF2411 is a 6 V / 6 A-rated bi-directional load
switch, consisting of a slew-rate-controlled, low-on-
resistance, P-channel MOSFET switch with protection
features. The slew-rate-controlled turn-on characteristic
prevents inrush current and the resulting excessive
voltage droop on the input power rails. The input voltage
range operates from 2.3 V to 5.5 V.
Bi-directional switching allows reverse current from VOUT
to VIN. The switching is controlled by active-LOW logic
input the ONB pin. The FPF2411 is capable of interfacing
directly with low-voltage control signal General-Purpose
Input / Output (GPIO).
The FPF2411 is available in 12-bump, 1.235 mm x
1.625 mm Wafer-Level Chip-Scale Package (WLCSP)
with 0.4 mm pitch.
Ordering Information
Part Number
Top R_ON (Typ.)
Mark at 3.8 V_IN
FPF2411BUCX_F130 QR 12 mΩ
Output
Discharge
No
ONB Pin
Functionality
Package
Active LOW
12-Ball Wafer-Level Chip-Scale
Package (WLCSP), 3 x 4 Array,
0.4 mm Pitch, 250 µm Ball
© 2015 Fairchild Semiconductor Corporation
FPF2411 • Rev. 1.7
www.fairchildsemi.com