FPF1208 Datasheet, PDF (1/12 Pages) Fairchild Semiconductor – IntelliMAX™Advanced Load Switch

October 2010
FPF1207 / FPF1208
IntelliMAX^™ Advanced Load Switch
Features
ƒ 1.2V to 4.0V Input Voltage Operating Range
ƒ Typical RON: 50mΩ at VIN=3.3V
77mΩ at VIN=1.8V
150mΩ at VIN=1.2V
ƒ Slew Rate Control with tR: 110µs
ƒ Output Discharge Function on FPF1208
ƒ Low <1.5µA Quiescent Current
ƒ Extra Low <100nA Off Supply Current
ƒ ESD Protected: Above 7000V HBM, 2000V CDM
ƒ GPIO/CMOS-Compatible Enable Circuitry
ƒ 4-Bump WLCSP 0.76mm x 0.76mm, 0.4mm Pitch
Description
The FPF1207/08 is an ultra-small integrated IntelliMAX^™
load switch with integrated P-channel switch and analog
control features. Integrated slew-rate control prevents
inrush current and the resulting excessive voltage drop
on power rail. The input voltage range operates from
1.2V to 4.0V to provide power-disconnect capability for
post-regulated power rails in portable and consumer
products. The low shut-off current of 1µA (maximum)
allows power designs to meet standby and off-power
drain specifications.
The FPF1207/08 is controlled by an active-HIGH logic
input (ON pin) compatible with standard CMOS GPIO
circuitry found on Field Programmable Gate Array
(FPGA) and embedded processors. The FPF1207/08 is
available in 0.76mm x 0.76mm 4-bump WLCSP.
Applications
ƒ Mobile Devices and Smart Phones
ƒ Portable Media Devices
ƒ Ultra-Portable / Mobile Computing
ƒ Advanced Notebook, UMPC, MID
ƒ Portable Medical Devices
ƒ GPS and Navigation Equipment
Ordering Information
Part Number
FPF1207UCX
Top
Marking
QG
Switch
(Typical)
at 3.3V_IN
50mΩ
FPF1208UCX
QH
50mΩ
Output
Discharge
NA
65Ω
ON Pin
Activity
t_R
Package
Active
HIGH
Active
HIGH
110µs _{4-Ball, Wafer-Level Chip-}
Scale Package (WLCSP),
110µs ^{0.76 x 0.76mm, 0.4mm Pitch}
© 2010 Fairchild Semiconductor Corporation
FPF1207 / FPF1208 • Rev. 1.0.0
www.fairchildsemi.com