|
FPF1205 Datasheet, PDF (1/11 Pages) Fairchild Semiconductor – IntelliMAX Advanced Load Switch | |||
|
December 2010
FPF1205 / FPF1206
IntelliMAX⢠Advanced Load Switch
Features
 1.2V to 4.0V Input Voltage Operating Range
 Typical RON: 75m⦠at VIN=3.3V
110m⦠at VIN=1.8V
240m⦠at VIN=1.2V
 Slew Rate Control with tR: 110µs
 Output Discharge Function on FPF1206
 Low <1.5µA Quiescent Current
 Extra Low <100nA Off Supply Current
 ESD Protected: Above 7000V HBM, 2000V CDM
 GPIO/CMOS-Compatible Enable Circuitry
 4-Bump WLCSP, 0.76mm x 0.76mm, 0.4mm Pitch
Description
The FPF1205/06 is an ultra-small IntelliMAX⢠load
switch with integrated P-channel switch and analog
control features. Internal slew-rate control prevents
inrush current and the resulting excessive voltage drop
on power rail. The input voltage range operates from
1.2V to 4.0V to provide power-disconnect capability for
post-regulated power rails in portable and consumer
products. The low shut-off current of 1µA (maximum)
allows power designs to meet standby and off-power
drain specifications.
The FPF1205/06 is controlled by an active-HIGH logic
input (ON pin) compatible with standard CMOS GPIO
circuitry found on Field Programmable Gate Array
(FPGA) and embedded processors. The FPF1205/06 is
available in a 0.76mm x 0.76mm 4-bump Wafer-Level
Chip-Scale Package (WLCSP).
Applications
 Mobile Devices and Smart Phones
 Portable Media Devices
 Ultra-Portable / Mobile Computing
 Advanced Notebook, UMPC, MID
 Portable Medical Devices
 GPS and Navigation Equipment
Ordering Information
Part Number Top Marking
FPF1205UCX
QK
FPF1206UCX
QL
Switch
(Typical)
at 3.3VIN
75mâ¦
75mâ¦
Output
ON Pin
Discharge Activity
tR
Package
NA
Active HIGH 110µs 4-Ball WLCSP, 0.76mm
65â¦
Active HIGH 110µs x 0.76mm, 0.4mm Pitch
© 2010 Fairchild Semiconductor Corporation
FPF1205 / FPF1206 ⢠Rev. 1.0.0
www.fairchildsemi.com
|
▷ |