|
FPF1048 Datasheet, PDF (1/3 Pages) Fairchild Semiconductor – IntelliMAX™ 3A-Capable, Slew-Rate-Controlled Load Switch with True Reverse Current Blocking | |||
|
March 2012
FPF1048B
IntelliMAX⢠3A-Capable, Slew-Rate-Controlled Load Switch
with True Reverse Current Blocking
Features
ï§ Input Voltage Operating Range: 1.5V to 5.5V
ï§ Typical RDS(ON):
- 21m⦠at VIN=5.5V
- 23m⦠at VIN=4.5V
- 41m⦠at VIN=1.8V
- 90m⦠at VIN=1.5V
ï§ Slew Rate/Inrush Control with tR: 2.7ms (Typ.)
ï§ 3A Maximum Continuous Current Capability
ï§ Low Off Switch Current: <1µA
ï§ True Reverse Current Blocking (TRCB)
ï§ Logic CMOS IO Meets JESD76 Standard for GPIO
Interface and Related Power Supply Requirements
ï§ ESD Protected:
- Human Body Model: >8kV
- Charged Device Model: >1.5kV
- IEC 61000-4-2 Air Discharge: >15kV
- IEC 61000-4-2 Contact Discharge: >8kV
Applications
ï§ Smart Phones, Tablet PCs
ï§ Storage, DSLR, and Portable Devices
Description
The FPF1048B advanced load management switch
targets applications requiring a highly integrated
solution. It disconnects loads powered from the DC
power rail (<6V) with stringent off-state current targets
and high load capacitances (up to 100µF). The
FPF1048B consists of slew-rate controlled low-
impedance MOSFET switch (23m⦠typical) and
integrated analog features. The slew-rate controlled
turn-on characteristic prevents inrush current and the
resulting excessive voltage droop on power rails.
The FPF1048B has a True Reverse Current Blocking
(TRCB) function that obstructs unwanted reverse
current from VOUT to VIN during both ON and OFF states.
The exceptionally low off-state current drain (<1µA
maximum) facilitates compliance with standby power
requirements. The input voltage range operates from
1.5V to 5.5VDC to support a wide range of applications in
consumer, optical, medical, storage, portable, and
industrial-device power management. Switch control is
managed by a logic input (active HIGH) capable of
interfacing directly with low-voltage control signal /
General-Purpose Input / Output (GPIO) without an
external pull-down resistor.
The device is packaged in advanced, fully âgreenâ
compliant, 1.0mm x 1.5mm, Wafer-Level Chip-Scale
Package (WLCSP) with backside lamination.
Ordering Information
Part Number
Top
Mark
FPF1048BUCX RA
Switch RON
(Typical)
at 4.5VIN
23mâ¦
Input Output ON Pin
Buffer Discharge Activity
tR
CMOS
NA
Active
HIGH
2.7ms
Package
6-Ball WLCSP, 2x3 Array,
0.5mm Pitch, 300µm Ball
© 2011 Fairchild Semiconductor Corporation
FPF1048B ⢠Rev. 1.0.3
www.fairchildsemi.com
|
▷ |