|
FPF1015 Datasheet, PDF (1/11 Pages) Fairchild Semiconductor – IntelliMAX 1V Rated Advanced Load Management Products | |||
|
June 2009
FPF1015/6/7/8
tm
IntelliMAXTM 1V Rated Advanced Load Management Products
Features
 0.8 to 1.8V Input Voltage Range
 Typical RDS(ON) = 34m⦠@ VON - VIN = 2.0V
 Output Discharge Function
 Internal Pull down at ON Pin
 Accurate Slew Rate Controlled Turn-on time
 Low < 1µA Quiescent Current
 ESD Protected, above 8000V HBM, 2000V CDM
 RoHS Compliant
 Free from Halogenated Compounds and Antimony Oxides
Applications
 PDAs
 Cell Phones
 GPS Devices
 MP3 Players
 Digital Cameras
 Notebook Computers
PIN 1
General Description
The FPF1015/6/7/8 series is an IntelliMAX advanced slew rate
loadswitch offering a very low operating voltage. These devices
consist of a 34m⦠N-channel MOSFET that supports an input
voltage up to 2.0V. These slew rate devices control the switch
turn-on and prevent excessive in-rush current from the supply
rails. The input voltage range operates from 0.8V to 1.8V to
fulfill today's lowest Ultraportable Device's supply requirements.
Switch control is via a logic input (ON) capable of interfacing
directly with low voltage control signals.
The FPF1016 and FPF1018 have an On-Chip pull down
allowing for quick and controlled output discharge when switch
is turned off. The FPF1015/6/7/8 series is available in a
space-saving 2X2 MLP-6L package.
BOTTOM
Typical Application Circuit
OFF ON
-
CIN
TOP
VIN
VOUT
FPF1015/6/7/8
ON
GND
TO LOAD
COUT
Ordering Information
Part
Switch Turn-on Time
FPF1015 34mâ¦, NMOS
43us
FPF1016 34mâ¦, NMOS
43us
FPF1017 34mâ¦, NMOS
165us
FPF1018 34mâ¦, NMOS
165us
Output Discharge
NA
60â¦
NA
60â¦
ON Pin Activity
Active HI
Active HI
Active HI
Active HI
©2009 Fairchild Semiconductor Corporation
1
FPF1015/6/7/8 Rev. D
Package
MLP 2x2
MLP 2x2
MLP 2x2
MLP 2x2
www.fairchildsemi.com
|
▷ |