FPF1013_12 Datasheet, PDF (1/11 Pages) Fairchild Semiconductor – IntelliMAX™ 1 V-Rated Advanced Load Management Products

November 2012
FPF1013 / FPF1014
IntelliMAX™ 1 V-Rated Advanced Load Management
Products
Features
 0.8 V to 1.8 V Input Voltage Range
 Typical R_DS(ON) = 17 mΩ at V_ON - V_IN = 2.0 V
 Output Discharge Function
 Internal Pull-Down at ON Pin
 Accurate Slew Rate Controlled Turn-on Time
 Low < 1 μA Quiescent Current
 ESD Protected, above 8 kV HBM, 2 kV CDM
Applications
 PDAs
 Cell Phones
 GPS Devices
 MP3 Players
 Digital Cameras
 Notebook Computers
Description
The FPF1013/14 IntelliMAX™ advanced slew rate load
switch offers very low operating voltage and a 17 mΩ N-
channel MOSFET that supports an input voltage up to
2.0 V. This slew-rate device control the switch turn-on
and prevent excessive inrush current from supply rails.
The input voltage range operates from 0.8 V to 1.8 V to
fulfill today's lowest mobile device supply requirements.
Switch control is via a logic input (ON) capable of
interfacing directly with low-voltage control signals.
The FPF1014 has an on-chip pull-down, allowing for
quick and controlled output discharge when the switch is
turned off. The FPF10131/4 is available in a space-
saving six-lead 1 mm x 1.5 mm Wafer-Level Chip-Scale
Package (WLCSP).
Figure 1.WLCSP Bump Configuration (Top & Bottom)
Figure 2. Typical Application
Ordering Information
Part Number Switch Turn-On Time Output Discharge ON Pin Activity
Package
FPF1013
FPF1014
17 mΩ, NMOS
17 mΩ, NMOS
43 μs
43 μs
N/A
60 Ω
Active HIGH
Active HIGH
WLCSP 950 µm x
1450 µm,
(see Figure 24)
© 2009 Fairchild Semiconductor Corporation
FPF1014 / FPF1014 • Rev. 1.0.9
www.fairchildsemi.com