FPF1013_11 Datasheet, PDF (1/11 Pages) Fairchild Semiconductor – IntelliMAX™ 1V-Rated Advanced Load Management Products

May 2011
FPF1013 / FPF1014
IntelliMAX™ 1V-Rated Advanced Load Management Products
Features
 0.8V to 1.8V Input Voltage Range
 Typical R_DS(ON) = 17mΩ at V_ON - V_IN = 2.0V
 Output Discharge Function
 Internal Pull-Down at ON Pin
 Accurate Slew Rate Controlled Turn-on Time
 Low < 1μA Quiescent Current
 ESD Protected, above 8kV HBM, 2kV CDM
Applications
 PDAs
 Cell Phones
 GPS Devices
 MP3 Players
 Digital Cameras
 Notebook Computers
Description
The FPF1013/14 IntelliMAX™ advanced slew rate load
switch offers very low operating voltage and a 17mΩ N-
channel MOSFET that supports an input voltage up to
2.0V. This slew-rate device control the switch turn-on
and prevent excessive inrush current from supply rails.
The input voltage range operates from 0.8V to 1.8V to
fulfill today's lowest mobile device supply requirements.
Switch control is via a logic input (ON) capable of
interfacing directly with low-voltage control signals.
The FPF1014 has an on-chip pull-down, allowing for
quick and controlled output discharge when the switch is
turned off. The FPF10131/4 is available in a space-
saving six-lead 1mm x 1.5mm Wafer-Level Chip-Scale
Package (WLCSP).
Figure 1. WLCSP Bump Configuration (Top & Bottom)
Figure 2. Typical Application
Ordering Information
Part Number
FPF1013
FPF1014
Switch Turn-On Time
17mΩ, NMOS
43μs
17mΩ, NMOS
43μs
Output Discharge
N/A
60Ω
ON Pin Activity
Active HIGH
Active HIGH
Package
WLCSP 1x1.5mm
(950µm ±30µm x
1450µm ±30µm x
225µm x 225µm,
see Figure 24)
© 2009 Fairchild Semiconductor Corporation
FPF1014 / FPF1014 • Rev. 1.0.8
www.fairchildsemi.com