FPF1007_12 Datasheet, PDF (1/12 Pages) Fairchild Semiconductor – IntelliMAX™ Advanced Load Products

October 2012
FPF1007-FPF1009
IntelliMAX™ Advanced Load Products
Features
 1.2 to 5.5 V Input Voltage Range
 Typical R_ON = 30 mΩ at V_IN = 5.5 V
 Typical R_ON = 40 mΩ at V_IN = 3.3 V
 Fixed Three Different Turn-on Rise Time 10 µs / 80 µs / 1 ms
 Low < 10 µA at V_IN = 3.3 V Quiescent Current
 Internal ON Pin Pull Down
 Output Discharge Function
 ESD Protection above 8000 V HBM and 2000 V CDM
 RoHS Compliant
Applications
 PDAs
 Cell Phones
 GPS Devices
 MP3 Players
 Digital Cameras
 Peripheral Ports
 Hot-Swap Supplies
 Notebook Computers
General Description
The FPF1007/8/9 are low R_DS P-Channel MOSFET load
switches offered in a selection of 10 µs, 80 µs, and 1 ms slew
rate turn-on options for transient / in-rush current control. To
support trends in mobile application requirements, the minimum
operating input voltage has been reduced down to 1.2 V, the
input current leakage has been minimized to extend battery life,
and the ESD-protection has been designed to withstand a
minimum of 8 kV (HBM) and 2 kV (CDM).
The switch is controlled by an active-high logic input (ON pin),
allowing direct interface with a low-voltage control signal. An
internal ON pin pull-down resistor protects against unintentional
device turn-on in the initial state. An on-chip pull-down resistor
on the output is enabled when the switch is turned-off and
provides quick, robust discharge of the output load.
BOTTOM
Pin 1
TOP
Ordering Information
Part
FPF1007
FPF1008
FPF1009
Switch R_ON at 5.5 V
[Typ.]
30 mΩ, PMOS
30 mΩ, PMOS
30 mΩ, PMOS
Rise Time
[Typ.]
10 µs
80 µs
1 ms
Output Discharge
[Typ.]
60 Ω
60 Ω
60 Ω
ON Pin
Activity
Active HIGH
Active HIGH
Active HIGH
© 2008 Fairchild Semiconductor Corporation
1
FPF1007-FPF1009 • Rev. 1.0.3
www.fairchildsemi.com