FPF1007 Datasheet, PDF (1/11 Pages) Fairchild Semiconductor – IntelliMAX™ Advanced Load Products

FPF1007-FPF1009
IntelliMAX™ Advanced Load Products
January 2008
tm
Features
„ 1.2 to 5.5V Input Voltage Range
„ Typical R_ON = 30 mΩ @ V_IN = 5.5V
„ Typical R_ON = 40 mΩ @ V_IN = 3.3V
„ Fixed Three Different Turn-on Rise-time 10µs/80µs/1ms
„ Low < 10µA @ V_IN = 3.3V Quiescent Current
„ Internal ON Pin Pull Down
„ Output Discharge Function
„ ESD Protection above 8000V HBM and 2000V CDM
„ RoHS Compliant
Applications
„ PDAs
„ Cell Phones
„ GPS Devices
„ MP3 Players
„ Digital Cameras
„ Peripheral Ports
„ Hot Swap Supplies
„ Notebook Computer
General Description
The FPF1007/8/9 are low RDS P-Channel MOSFET load
switches offered in a selection of 10µs, 80µs, and 1ms slew rate
turn-on options for transient/in-rush current control. To support
trends in mobile application requirements the minimum
operating input voltage has been reduced down to 1.2V, the
input current leakage has been minimized to extend battery life,
and the ESD-protection has been designed to withstand a
minimum of 8KV (HBM) and 2KV(CDM).
The switch is controlled by an active-high logic input (ON pin)
allowing it to interface directly with a low voltage control signal.
An internal ON pin pull down resistor protects against an
unintentional device turn-on while in the initial state. An On-chip
pull-down resistor on the output is enabled when the switch is
turned-off and provides a quick and robust discharge of the
output load.
BOTTOM
Pin 1
Ordering Information
Part
FPF1007
FPF1008
FPF1009
Switch R_ON @ 5.5V
[Typ.]
30mΩ, PMOS
30mΩ, PMOS
30mΩ, PMOS
Rise Time
[Typ.]
10µs
80µs
1ms
TOP
Output Discharge
[Typ.]
60Ω
60Ω
60Ω
ON Pin
Activity
Active HI
Active HI
Active HI
©2008 Fairchild Semiconductor Corporation
1
FPF1007-FPF1009 Rev. B1
www.fairchildsemi.com