|
DM96S02 Datasheet, PDF (1/7 Pages) Fairchild Semiconductor – Dual Retriggerable Resettable Monostable Multivibrator | |||
|
January 1992
Revised June 1999
DM96S02
Dual Retriggerable Resettable Monostable Multivibrator
General Description
The DM96S02 is a dual retriggerable and resettable
monostable multivibrator. This one-shot provides excep-
tionally wide delay range, pulse width stability, predictable
accuracy and immunity to noise. The pulse width is set by
an external resistor and capacitor. Resistor values up to 2.0
M⦠for the DM96S02 reduce required capacitor values.
Hysteresis is provided on the positive trigger input of the
DM96S02 for increased noise immunity.
Order Code:
Order Number Package Number
Package Description
DM96S02M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM96S02N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter âXâ to the ordering code.
Logic Diagram
Connection Diagram
VCC = Pin 16
GND = Pin 8
Pin Descriptions
Pin Names
Description
I0
Trigger Input (Active Falling Edge)
I1
Schmitt Trigger Input (Active Rising-Edge)
CD
Q1 - 2
Direct Clear Input (Active-LOW)
True Pulse Output
Q1 - 2
Complementary Pulse Output
CX1, 2
RX1,2
External Capacitor Connection
External Resistor Connection
Triggering Truth Table
Pin Number
5(11)
4(12)
3(13)
HâL
L
H
H
LâH
H
X
X
L
H = HIGH Voltage Level ⥠VIH
L = LOW Voltage Level ⤠VIL
X = Immaterial (either H or L)
H â L = HIGH-to-LOW Voltage Level transition
L â H = LOW-to-HIGH Voltage Level transition
Operation
Trigger
Trigger
Reset
© 1999 Fairchild Semiconductor Corporation DS009810.prf
www.fairchildsemi.com
|
▷ |