DM96L02 Datasheet, PDF (1/6 Pages) Fairchild Semiconductor – Dual Retriggerable Resettable Monostable Multivibrator

March 1989
Revised February 2000
DM96L02
Dual Retriggerable Resettable Monostable Multivibrator
General Description
The DM96L02 is a dual TTL monostable multivibrator with
trigger mode selection, reset capability, rapid recovery,
internally compensated reference levels and high speed
capability. Output pulse duration and accuracy depend on
external timing components, and are therefore under user
control for each application. It is well suited for a broad vari-
ety of applications, including pulse delay generators,
square wave generators, long delay timers, pulse absence
detectors, frequency detectors, clock pulse generators and
fixed-frequency dividers. Each input is provided with a
clamp diode to limit undershoot and minimize ringing
induced by fast fall times acting on system wiring imped-
ances.
Features
s Retriggerable, 0% to 100% duty cycle
s DC level triggering, insensitive to transition times
s Leading or trailing-edge triggering
s Complementary outputs with active pull-ups
s Pulse width compensation for ∆V_CC and ∆T_A
s 50 ns to ∞ output pulse width range
s Optional retrigger lock-out capability
s Resettable, for interrupt operations
Ordering Code:
Order Number Package Number
Package Description
DM96L02N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Logic Symbol
Connection Diagram
V_CC = Pin 16
GND = Pin 8
Pin Descriptions
Pin Names
Description
I0
I1
C_D
Q
Q
CX
RX
Trigger Input (Active Falling Edge)
Trigger Input (Active Rising Edge)
Direct Clear Input (Active LOW)
Positive Pulse Output
Complementary Pulse Output
External Capacitor Connection
External Resistor Connection
© 2000 Fairchild Semiconductor Corporation DS010203
www.fairchildsemi.com