DM74LS90 Datasheet, PDF (1/6 Pages) National Semiconductor (TI) – Decade and Binary Counters

August 1986
Revised March 2000
DM74LS90
Decade and Binary Counters
General Description
Each of these monolithic counters contains four master-
slave flip-flops and additional gating to provide a divide-by-
two counter and a three-stage binary counter for which the
count cycle length is divide-by-five for the DM74LS90.
All of these counters have a gated zero reset and the
DM74LS90 also has gated set-to-nine inputs for use in
BCD nine’s complement applications.
To use their maximum count length (decade or four bit
binary), the B input is connected to the Q_A output. The
input count pulses are applied to input A and the outputs
are as described in the appropriate truth table. A symmetri-
cal divide-by-ten count can be obtained from the
DM74LS90 counters by connecting the Q_D output to the A
input and applying the input count to the B input which
gives a divide-by-ten square wave at output Q_A.
Features
s Typical power dissipation 45 mW
s Count frequency 42 MHz
Ordering Code:
Order Number Package Number
Package Description
DM74LS90M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
DM74LS90N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Reset/Count Truth Table
R0(1)
H
H
X
X
L
L
X
Reset Inputs
R0(2) R9(1)
H
L
H
X
X
H
L
X
X
L
X
X
L
L
R9(2)
X
L
H
L
X
L
X
Output
Q_D Q_C Q_B Q_A
LLLL
LLLL
HL LH
COUNT
COUNT
COUNT
COUNT
© 2000 Fairchild Semiconductor Corporation DS006381
www.fairchildsemi.com