DM7474 Datasheet, PDF (1/5 Pages) Fairchild Semiconductor – Dual Positive-Edge-Triggered D-Type Flip-Flops with Preset, Clear and Complementary Outputs

September 1986
Revised February 2000
DM7474
Dual Positive-Edge-Triggered D-Type Flip-Flops with
Preset, Clear and Complementary Outputs
General Description
This device contains two independent positive-edge-trig-
gered D-type flip-flops with complementary outputs. The
information on the D input is accepted by the flip-flops on
the positive going edge of the clock pulse. The triggering
occurs at a voltage level and is not directly related to the
transition time of the rising edge of the clock. The data on
the D input may be changed while the clock is LOW or
HIGH without affecting the outputs as long as the data
setup and hold times are not violated. A LOW logic level on
the preset or clear inputs will set or reset the outputs
regardless of the logic levels of the other inputs.
Ordering Code:
Order Number Package Number
Package Description
DM7474M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM7474N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Function Table
Inputs
Outputs
PR
CLR CLK
D
Q
Q
L
H
X
X
H
L
H
L
X
X
L
H
L
L
X
X
H
H
(Note 1) (Note 1)
H
H
↑
H
H
L
H
H
↑
L
L
H
H
H
L
X
Q₀
Q₀
H = HIGH Logic Level
X = Either LOW or HIGH Logic Level
L = LOW Logic Level
↑ = Positive-going transition of the clock.
Q₀ = The output logic level of Q before the indicated input conditions were
established.
Note 1: This configuration is nonstable; that is, it will not persist when either
the preset and/or clear inputs return to their inactive (HIGH) level.
© 2000 Fairchild Semiconductor Corporation DS006526
www.fairchildsemi.com