BSS84_13 Datasheet, PDF (1/6 Pages) Fairchild Semiconductor – P-Channel Enhancement Mode Field-Effect Transistor

February 2013
BSS84
P-Channel Enhancement Mode Field-Effect Transistor
Features
 -0.13 A, -50 V, R_DS(ON) = 10 Ω at V_GS = -5 V
 Voltage-Controlled P-Channel Small-Signal
Switch
 High-Density Cell Design for Low R_DS(ON)
 High Saturation Current
D
D
S
SOT-23
G
G
S
Absolute Maximum Ratings
Description
This P-channel enhancement-mode field-effect
transistor is produced using Fairchild’s proprietary,
high cell density, DMOS technology. This very high
density process minimizes on-state resistance and to
provide rugged and reliable performance and fast
switching. The BSS84 can be used, with a minimum
of effort, in most applications requiring up to 0.13 A
DC and can deliver current up to 0.52 A. This product
is particularly suited to low-voltage applications
requiring a low-current high-side switch.
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. Values are at T_A = 25°C unless otherwise noted.
Symbol
V_DSS
V_GSS
I_D
P_D
T_J, T_STG
T_L
Parameter
Drain-Source Voltage
Gate-Source Voltage
Drain Current⁽¹⁾
Maximum Power Dissipation⁽¹⁾
Continuous
Pulsed
Derate Above 25°C
Operating and Storage Junction Temperature Range
Maximum Lead Temperature for Soldering
Purposes, 1/16” from Case for 10 Seconds
Ratings
−50
±20
−0.13
−0.52
0.36
2.9
−55 to +150
300
Unit
V
V
A
A
W
mW / °C
°C
°C
Thermal Characteristics
R_θJA
Thermal Resistance, Junction-to-Ambient⁽¹⁾
350
°C/W
Note:
1. R_θJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference
is defined as the solder mounting surface of the drain pins. R_θJA is guaranteed by design, while R_θJA is
determined by the user's board design.
a) 350°C/W when mounted on a minimum pad
Scale 1: 1 on letter-size paper.
Package Marking and Ordering Information
Device Marking
SP
Device
BSS84
Reel Size
7’’
Tape width
8mm
Quantity
3000
© 2002 Fairchild Semiconductor Corporation
BSS84 • Rev. 1.1.0
www.fairchildsemi.com