AN-90 Datasheet, PDF (1/7 Pages) Fairchild Semiconductor – 74C Family Characteristics

74C Family Characteristics
Fairchild Semiconductor
Application Note 90
August 1973
INTRODUCTION
The purpose of this 54C/74C Family Characteristics applica-
tion note is to set down, in one place, all those characteris-
tics which are common to the devices in the MM54C/MM74C
logic family. The characteristics which can be considered to
apply are:
1. Output voltage-current characteristics
2. Noise characteristics
3. Power consumption
4. Propagation delay (speed)
5. Temperature characteristics
With a good understanding of the above characteristics the
designer will have the necessary tools to optimize his sys-
tem. An attempt will be made to present the information in as
simple a manner as possible to facilitate its use. This
coupled with the fact that 54C/74C has the same function
and pin-out as standard series 54L/74L will make the appli-
cation of CMOS to digital systems very straightforward.
OUTPUT CHARACTERISTICS
Figure 1 and Figure 2 show typical output drain characteris-
tics for the basic inverter used in the 54C/74C family. For
more detailed information on the operation of the basic in-
verter the reader is directed to Application Note AN-77,
“CMOS, The Ideal Logic Family”. Although more complex
gates, and MSI devices, may be composed of combinations
of parallel and series transistors the considerations that gov-
ern the output characteristics of the basic inverter apply to
these more complex structures as well.
(A) Typical Output Sink
Characteristic (N-Channel)
AN006021-1
FIGURE 1.
(B) Typical Output Source
Characteristic (P-Channel)
AN006021-2
(A) Typical Output Sink
Characteristic (N-Channel)
AN006021-3
FIGURE 2.
(B) Typical Output Source
Characteristic (P-Channel)
AN006021-4
© 1998 Fairchild Semiconductor Corporation AN006021
www.fairchildsemi.com