English
Language : 

74LCX540_06 Datasheet, PDF (1/14 Pages) Fairchild Semiconductor – Low Voltage Octal Buffer/Line Driver with 5V Tolerant Inputs and Outputs
March 2006
74LCX540
Low Voltage Octal Buffer/Line Driver
with 5V Tolerant Inputs and Outputs
Features
■ 5V tolerant input and outputs
■ 2.3V–3.6V VCC specifications provided
■ 6.5ns tPD max (VCC = 3.3V), 10µA ICC max
■ Power down high impedance inputs and outputs
■ Supports live insertion/withdrawal(1)
■ Implements patented noise/ EMI reduction circuitry
■ Latch-up performance exceeds JEDEC 78 conditions
■ ESD performance
– Human body model > 2000V
– Machine model > 200V
■ Leadless Pb-Free DQFN package
General Description
The LCX540 is an octal buffer/line driver designed to be
employed as a memory and address driver, clock driver
and bus oriented transmitter/receiver.
This device is similar in function to the LCX240 while
providing flow-through architecture (inputs on opposite
side from outputs). This pinout arrangement makes this
device especially useful as an output port for micropro-
cessors, allowing ease of layout and greater PC board
density.
The LCX540 is designed for low voltage (2.5V or 3.3V)
VCC applications with capability of interfacing to a 5V
signal environment. The LCX540 is fabricated with an
advanced CMOS technology to achieve high speed
operation while maintaining CMOS low power dissipa-
tion.
Ordering Information
Package
Order Number Number
Package Description
74LCX540WM
M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
74LCX540SJ
74LCX540BQX(2)
M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MLP020B Pb-Free 20-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN),
JEDEC MO-241, 2.5 x 4.5mm
74LCX540MSA
MSA20 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide
74LCX540MTC
74LCX540MTC_NL(3)
MTC20
MTC20
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153,
4.4mm Wide
Pb-Free 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC
MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Pb-Free package per JEDEC J-STD-020B.
Notes:
1. To ensure the high impedance state during power up or down, OE should be tied to VCC through a pull-up resistor: the minimum
value of the resistor is determined by the current-sourcing capability of the driver.
2. DQFN package available in Tape and Reel only.
3. “_NL” indicates Pb-Free package (per JEDEC J-STD-020B). Device available in Tape and Reel only.
©2006 Fairchild Semiconductor Corporation
1
74LCX540 Rev. 1.0.0
www.fairchildsemi.com