74ACT258_07 Datasheet, PDF (1/10 Pages) Fairchild Semiconductor – Quad 2-Input Multiplexer with 3-STATE Outputs

74ACT258
Quad 2-Input Multiplexer with 3-STATE Outputs
April 2007
tm
Features
■ I_CC and I_OZ reduced by 50%
■ Multiplexer expansion by tying outputs together
■ Inverting 3-STATE outputs
■ Outputs source/sink 24mA
■ TTL-compatible inputs
General Description
The ACT258 is a quad 2-input multiplexer with 3-STATE
outputs. Four bits of data from two sources can be
selected using a common data select input. The four out-
puts present the selected data in the complement
(inverted) form. The outputs may be switched to a high
impedance state with a HIGH on the common Output
Enable (OE) input, allowing the outputs to interface
directly with bus-oriented systems.
Ordering Information
Order
Number
Package
Number
Package Description
74ACT258SC
74ACT258SJ
74ACT258MTC
M16A
M16D
MTC16
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012,
0.150” Narrow Body
16-Lead Small Outline Package (SOP), EIAJ TYPE 11, 5.3mm Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153,
4.4mm Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.
Connection Diagram
Pin Description
Pin Names
S
OE
I_0a–I_0d
I_1a–I_1d
Z_a–Z_d
Description
Common Data Select Input
3-STATE Output Enable Input
Data Inputs from Source 0
Data Inputs from Source 1
3-STATE Inverting Data Outputs
FACT™ is a trademark of Fairchild Semiconductor Corporation.
©1988 Fairchild Semiconductor Corporation
74ACT258 Rev. 1.4
www.fairchildsemi.com