2961666654 Datasheet, PDF (1/5 Pages) Fair-Rite Products Corp. – 61 WOUND BEAD

Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: [phone] www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2961666654
Printed: 2010-11-09
Part Number:
2961666654
Frequency Range: Higher Frequencies 50-500 MHz (61 material)
Description:
61 WOUND BEAD
Application:
Where Used:
Suppression Components
Board Component
Part Type:
Preferred Part:
Wound Beads
Mechanical Specifications
Weight:
1.300 (g)
Part Type Information
Six and eleven hole beads, in two NiZn materials, are available both as beads (product class 26) and wound with tinned copper
wire in several winding configurations (product class 29).
-Parts with a '1' as the last digit of the part number are supplied bulk packed. Wound beads with part numbers 29--666631 and
29--666651 can be supplied radially taped and reeled per IEC 60286-1 and EIA 468-B standards. For these taped and reeled
wound beads the last digit of the part number is a '4'. Taped and reeled wound beads are supplied 500 pieces on a 13'' reel.
-Wire used for winding is oxygen free high conductivity copper with a lead-free tin plating.
-Beads are controlled for impedance limits only. The impedances listed are typical values. Minimum impedance values are
specified for the + marked frequencies. The minimum guaranteed impedance is the listed impedance less 20%. The 44 material
beads and wound beads are tested on the 4193A Vector Impedance Meter. The 61 material parts on the 4191A RF Impedance
Analyzer.
-Recommended storage temperature and operating temperature is -55°C to 125°C
-For any wound bead requirement not listed in here, please contact our customer service group for
availability and pricing.
-Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 1 = bulk packed, 4 = taped and
reeled.