2952770302 Datasheet, PDF (1/5 Pages) Fair-Rite Products Corp. – 52 SM PC BEAD

Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: [phone] www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2952770302
Printed: 2010-11-09
Part Number:
2952770302
Frequency Range: Higher Frequencies 250-1000 MHz (52 material)
Description:
52 SM PC BEAD
Application:
Suppression Components
Where Used:
Board Component
Part Type:
PC Beads (Through Hole)
Mechanical Specifications
Weight:
7.400 (g)
Part Type Information
Multiple single turn or multi-turn printed circuit EMI suppression beads are available in two Fair-Rite materials. The broadband
44 material and in the high frequency 52 material grade.
-PC Beads can be supplied with lower component heights 'C'. Also, the wire length 'F' can be modified to specific requirements.
-Wires are oxygen free high conductivity copper with a lead-free tin coating. Wires on top of the beads are
covered with a layer of epoxy.
-PC Beads are controlled for impedance only. The impedances listed are typical values. Minimum impedance values are specified for the
+ marked frequencies. The minimum guaranteed impedance is the listed impedance less 20%.
-The PC Beads in 44 material are measured on the 4193A Vector Impedance Analyzer. The 52 PC Beads are tested for impedance on the
4191A RF Impedance Analyzer.
-Recommended operating and storage temperature for the PC Beads is -55°C to +125°C.
-Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 1 = standard wire length 2.4 mm (.095'')
minimum.