2743003111 Datasheet, PDF (1/5 Pages) Fair-Rite Products Corp. – 43 BEAD ON LEAD

Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: [phone] www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 2743003111
Printed: 2010-11-09
Part Number:
2743003111
Frequency Range: Broadband Frequencies 25-300 MHz (43 material)
Description:
43 BEAD ON LEAD
Application:
Suppression Components
Where Used:
Board Component
Part Type:
Beads-on-Leads
Preferred Part:
Mechanical Specifications
Weight:
.500 (g)
Part Type Information
Ferrite suppression beads are supplied assembled on tinned copper wire for automated circuit board assembly.
-Parts with a '2' as the last digit of the part number are supplied taped and reeled per IEC 60286-1 and EIA
RS-296-F standards. Taped and reeled parts are supplied 4500 pieces on a 14'' reel. Taping details: Component
pitch 5 mm. Inside tape spacing 52.5 mm. Tape width 6 mm.
-Beads-on-leads can be supplied bulk packed. The last digit of bulk packed parts is a '1'.
-Wires are oxygen free high conductivity copper with a lead-free tin coating. The resistance of the wire is 3.5 mOhm
for the 22 AWG and 2.2 mOhm for the 20 AWG wire.
-Beads-on-leads are controlled for impedances only. The impedances listed are typical values. Minimum impedance values
are specified for the + marked frequencies. The minimum guaranteed impedance is the listed impedance less 20%. The
impedances of the 73 & 43 beads-on-leads are measured on the 4193A Vector Impedance Analyzer. The 61 beads-on-leads
are tested for impedance on the 4191A RF Impedance Analyzer.
-Preferred beads-on-leads are the suggested choice for new designs. Samples are readily available and orders have
typically shorter lead times than other beads-on-leads. For any bead-on lead requirement not listed here, feel free
to contact our customer service group for availability and pricing.
-Our 'Bead-on-Lead Suppression Kit' (part number 0199000028) is available for prototype evaluation.
-Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade and last digit 1 = bulk packed,
2 = taped and reeled.