451126 Datasheet, PDF (7/10 Pages) Extech Instruments Corporation. – Vane Thermo-Anemometer Datalogger

Software Requirements and Installation
The 451126 software lets the user:
• Download logged recordings from the meter’s memory
• Record to the PC
• Graphically display readings from the meter
System Requirements
Hardware Requirements: PC recommended with processor of Pentium III 600MHz or
above.
RAM: Recommended 512MB of RAM or more
Screen Resolution: requires 1,024 x 768 pixels.
451126 Anemometer
Operating System Compatibility: Windows^TM 95/98/NT/2000/XP/VISTA
Hardware Connection
The meter connects to a PC with the supplied DB-9 to DB-9 interface cable. The meter
can also be used with a Serial to USB Adaptor. NOTE: The driver that comes with the
adaptor should be installed in order to connect via USB. Please follow the instructions
that came with your adaptor.
Software Installation
Load the software CD in the PC CD-ROM drive. Close any open programs. Click on
SETUP and the following windows will appear directing the user through the install:
7
Model 451126 V2.0 6/08