MN26 Datasheet, PDF (4/10 Pages) Extech Instruments Corporation. – Mini Autoranging MultiMeter

Diode Test
Continuity Check
Input Impedance
Display
Overrange indication
Polarity
Measurement Rate
Auto Power Off
Low Battery Indication
Batteries
Fuses
Operating Temperature
Storage Temperature
Relative Humidity
Operating Altitude
Weight
Size
Safety
Meter Description
1. LCD Display
2. Function switch
3. Function key
4. Range key
5. Temperature jack
6. COM jack
7. 10A jack
8. Positive jack
9. Relative key
10. Data Hold key
Test current of 0.3mA maximum, open circuit voltage 1.5V DC
typical
Audible signal will sound if the resistance is less than
approximately 30Ω, test current <0.7mA
7.5MΩ (VDC and VAC)
4000 count LCD
“OL” is displayed
Automatic (no indication for positive polarity); Minus (-) sign for
negative polarity.
2 times per second, nominal
Meter automatically shuts down after 15 minutes of inactivity
“BAT” is displayed
Requires two AAA batteries
mA, µA ranges, 0.5A/250V fast blow
10A range, 10A/250V fast blow
32^oF to 122^oF (0^oC to 50^oC)
-4^oF to 140^oF (-20^oC to 60^oC)
<70% operating, <80% storage
7000ft (2000 meters) maximum.
9.17 oz. (260g).
4.78” x 2.38” x 1.57” (121.5mm x 60.6mm x 40mm)
For indoor use and in accordance with Overvoltage Category
II, Pollution Degree 2. Category II includes local level,
appliance, portable equipment, etc., with transient
overvoltages less than Overvoltage Category III.
1
10
4
3
9
2
5
6
7
8
Note: Tilt stand, fuse and battery compartment are on rear of unit.
4
MN26T V4.0 05/05