HD200 Datasheet, PDF (3/10 Pages) Extech Instruments Corporation. – Differential Thermometer Datalogger

Description
Meter Description
1. Thermocouple inputs
2. PC USB interface input
3. IR probe input jack
4. Up arrow button
5. SETUP & Display backlight button
6. Down arrow and Record button
7. Temperature units select button
8. MAX-MIN button
9. Display configuration button
10. LCD Display
11. ENTER button
12. Battery compartment & Tripod mount (rear)
13. Display HOLD button
14. Power button
Note: Description of IR sensor contained in later section.
Display Description
1. Thermocouple type (Icon flashes when the
meter is recording)
2. IR temperature (display flashes when the meter
recording)
3. Data Hold mode (readings are frozen on
display)
4. Appears when meter is in the SETUP mode
5. Primary Display: T1, T2, T3 , T1-T2,T1-T3,or
T2-T3 reading.
6. Secondary Display: MAX, MIN, AVG, offset,T1,
T2 , or T3 reading.
7. Temperature unit of measure
8. Third display. Elapsed timer or T1, T2, T3 reading
9. Low battery icon
10. Timer
11. MAX, MIN, AVG display mode icons
3
Model HD200 Version 2.0 December 2007