|
407123 Datasheet, PDF (3/8 Pages) Extech Instruments Corporation. – Hot Wire Thermo-Anemometer | |||
|
◁ |
Description
Meter Description
1. LCD display â Indicates air velocity and
temperature readings, units of measure,
low battery icon, and other user alerts
9
2. Push-buttons:
⢠POWER: Turn meter ON and OFF
⢠HOLD: Freezes the displayed reading
⢠C/F: Select the temperature units
⢠RECORD: Press to track the highest
(MAX) and lowest (MIN) reading
⢠RECALL: Displays MAX/MIN readings
⢠UNIT: Air velocity units of measure
⢠ZERO: Press to zero the display
(sensor cover must be closed)
3. Protective holster â Rubber jacket that
surrounds the meter (must be removed
to access battery compartment)
4. Battery compartment - Located on the
lower back of the meter
5. PC Interface jack â Accepts a 3.5mm
plug from a PC interface cable (cable
and data acquisition software available
using part number 407001)
6. Sensor input jack â Insert the sensor
plug
7. Sensor opening â Air must flow through this opening for proper measurement
8. Telescoping sensor handle â Extends to 39â (1m)
9. Sensor protective cover â Slide DOWN to open when in use and slide UP to protect
sensor when not in use (close the cover when zeroing the meter)
Sensor Tip Description
1
1. Air Direction indentation
2. Air Velocity Sensor
3. Sensor cover in lower (measurement) open position
4. Sensor cover in upper (zero) closed position
5. Temperature sensor
3
2
4
5
3
407123 V6.2 3/08
|
▷ |