381285 Datasheet, PDF (20/24 Pages) Extech Instruments Corporation. – Handheld MultiScope

SET UP
The setup function provides a means to set measurement default conditions and also
provides access to a Self-Test, Auxiliary inputs and a Users Manual.
Press the F1 Next Item key to move the selection pointer to the desired item.
Press the F2 ◄► key to select the desired condition.
Press the F3 Save key to save the selection.
Printer
Baud rate
Parity bit:
dBm reference :
Beeper:
Sleep mode:
Back-light:
EPSON M-T102,
1200bps, 2400bps, 4800bps, 9600bps.
NONE
2Ω, 4Ω, 8Ω, 16Ω, 50Ω, 75Ω, 93Ω, 110Ω, 125Ω,
135Ω, 150Ω, 300Ω, 600Ω, 900Ω, 1000Ω, 1200Ω.
enable, disable.
enable, disable
OFF, 15s, 30s, 60s, no limit.
Press the F4 More key to redefine the function keys.
Press the F1 Self Test key to run a system and memory self test.
Press the F2 Auxiliary key to select auxiliary input from temperature, humidity or high
current multimeter adaptors
Press the F3 UsersManual key to access the built-in users manual.
AUX
The auxiliary selection allows direct display of ºC / ºF, %RH, High DC Currents in the correct
units when the meter is used with an external DC Adapter. The external DC Adapter should
output 1mV DC / unit of measure.
1. Insert the black adapter banana plug into the negative (COM) jack and red adapter
banana plug in to the positive AUX jack.
2. Set the function switch to the SET UP position.
3. Press the F4 More key and then the F2 Auxiliary key
4. Press the F1 ºC / ºF key, F2 %RH key or the F3 High Current key to match the
adaptor being used.
5. Press the F4 EXIT key to return to the previous menu.
20
V2.1 03/06